0
The previous response was: "I have a Mazda millenia 1998 that has over 200,000 miles on it. I have always replaced my timing belt every 60,000 miles. I hope this helps."
The manual says to change at 105,000. The reality is that the belts are kevlar and will likely last much longer. The engine is non-interference so it will not damage the engine if it breaks. The experts I speak with say they would drive it until it breaks.
It will cost you around $500 at least in labor to replace and many times if the job is done improperly you will have other problems as a result.
For the record, my 99 S has 110,000 on the original belt. I'm not even thinking about replacing it... until it breaks (if that ever happens).
What else can I help you with?
How do you replace timing belt on Mazda millenia?
timing marks on 2002 Mazda millennium 2.5 dohc
P1195 98 Mazda millenia?
does the car still run? When ours went out, we had to replace the timing belt.
How many belts are there on a 1997 Mazda Millenia Swhere are they and how do you replace them?
There are four types of belts on a 1997 Mazda Millenia S. There are 4 seatbelts, a timing belt, a serpentine or drive belt, and a fan belt. Please refer to your owners manual for instructions on how to replace them. If you do not have an owners manual, you may purchase one through Amazon.com
Is the 1999 Mazda millenia have an interference engine?
2.5L V-6 Mazda Millenia engine is a non-interference engine. If your timing belt pops, you will not damage your valves, like I did in my Diamante
How do you replace the fan belt on a 2000 Mazda Miata?
There is no fan belt on a Mazda Miata.
How do you replace a water pump on a 1999 Mazda Millenia?
take it to a shop its behind the timing belt cover you have to take every thing off the front of the engine including the motor mount!!!
How do you replace the water pump on a 2000 Mazda Millenia?
In order to remove the water pump on a 2000 Mazda Millennia, you must first remove the timing belt and the pulley for the water pump. Remove the pump itself by detaching the four bolts that are securing it. Next, replace any gaskets, install the new pump, then the pulley, and then the timing belt.
How do you replace power steering belt on 2003 Mazda Protege LX?
How do you replace power steering belt on 2003 Mazda protege ?1.6
How do you replace a water pump in a 2002 Mazda millenia?
To replace the water pump in a 2002 Mazda Millenia, first disconnect the negative battery cable and drain the coolant. Remove the necessary components, including the serpentine belt, timing cover, and timing belt if applicable, to access the water pump. Take out the old pump, clean the mounting surface, and install the new water pump with a new gasket. Reassemble the components in reverse order, refill the coolant, and reconnect the battery.
How long to replace timing belt and water pump on 02 Mazda millenia?
2.5 hrs book to half a day-depends on shop. Many recommend replacing pensioner at the same time as well. 300-600.00/50.00-90.00 for belt.
What does it mean to buy a belt?
belt for you car. Timeing belt for power steering, fan clutch, ect...
Replace the timing belt on a 1992 Mazda MPV?
Replace the belt every 60,000 miles. Warning: This is an interference engine.
