0
The timing belt on the b6 & k8 motors should be changed every 60-80k miles depending on the wear of the belt. You can check the wear yourself by removing the valve cover on the b6 model where as the k8 is somewhat more difficult and will require removing the timing cover. If there are any nicks, frays, or cracks the belt should be replaced.
What else can I help you with?
How do you change your water pump on a 93 Mazda mx3 4cylinder?
To change the water pump on a 1993 Mazda MX-3 with a 4-cylinder engine, first, disconnect the negative battery terminal and drain the coolant. Remove the drive belts, then take off the timing cover and loosen the timing belt tensioner to remove the timing belt. With the timing belt out of the way, unbolt the old water pump, clean the mating surfaces, and install the new pump with a new gasket. Reassemble in reverse order, ensuring proper alignment of the timing belt and tensioner.
How do you change the serpentine belt on a 1995 Mazda mx3?
on the alternator on top is a bolt losen that bolt and it will allow you to move alternator causing belt to losin
How do you set timing on a 1995 Mazda MX3?
This is done the same as the 1995 Mazda MX6. The answer is posted.
How do you change the thermostat on a 1993 Mazda mx3?
waste of time
How do you loosen the alternator belt on a Mazda Mx3?
On a Mazda MX-3 (1994) you need to tighten the adjustment bolt that is close to the fire wall. Tightening the bolt loosen the belt - loosening the bolt tightens the belt
94 Mazda mx3 1.8 timing belt replacement diagram?
To replace the timing belt on a 1994 Mazda MX-3 1.8, you'll need to refer to a service manual for a detailed diagram, as it provides the specific routing of the belt. Generally, the process involves removing the protective covers, aligning the timing marks on the crankshaft and camshaft, and then installing the new timing belt while ensuring proper tension. It's crucial to follow the manufacturer's specifications for torque settings and belt tension to ensure proper operation. Always double-check the alignment before reassembling the components.
How do change brake pads on Mazda mx3?
well i just changed the brakes on my Mazda mx3 what you do is take the 2 pins out of the calipers which is holding the pads in place and then you are able to remove the pads
How do you replace fan belt on 1994 Mazda mx3?
well...there is no fan belt on any model of mx3, its using an electrical fan, and if you have A/C it has a second electrical fan just beside it. If its not working, it could be the relay, the motor, or the coolant sensor
Head gasket bolt torque specs for a Mazda mx3?
What are the head bolt torque specs for a mazda mx3 1600
When was the Mazda MX3 first produced?
The Mazda MX3 was first produced in 1991. It was introduced at the Geneva Motor Show in March of 1991. The MX3 was produced until 1998, when production was halted.
Mazda mx3 gets no fire changed fuel pump distributor pcm timing belt crank sensor what is left?
try HEI mod it should work http://www.mx-3.com/phpBB3/viewtopic.php?f=15&p=461052
Why does your 1995 Mazda mx3 fuel burp apon axcel?
Change your spark plugs. Bosch super plus.
