answersLogoWhite

0

You can get an oem denso pump at rockauto.com for just over 100$

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Where is the fuel pump switch on a 1991 Honda CRX located?

Honda CRX was built from Honda Civic platform and shared many components with the Civic. All Honda CRX models have a mechanical fuel pump that can be easily located within the engine bay, making fuel-pump replacement much easier than on some newer cars.?æ


Does 1990 Honda CRX have a fuse and a relay for the fuel pump?

Yes it does.


What fuel pump will match up with the 1990 crx si?

any 1.6liter Honda civic fuel pump


1.5 fit in a 1986 Honda CRX?

The 1986 Honda CRX already has a 1.5.


Where is the fuel pump on a 1988 Honda CRX?

The fuel pump is located inside the gas tank. You have drop the tank to replace it.


Can you replace fuel pump on your crx 85 mk1 with in tank fuel pump from other Honda?

Yes, you can replace the fuel pump in a 1985 Honda CRX Mk1 with an in-tank fuel pump from another Honda model, but compatibility is key. You'll need to ensure that the replacement pump fits the CRX's fuel tank and matches its flow rate and pressure requirements. Additionally, modifications to the wiring or fuel lines may be necessary depending on the donor vehicle. Always verify that the replacement part meets the specifications needed for optimal performance.


How do you convert a carbureted 1986 Honda CRX to fuel injected?

To convert a carbureted 1986 Honda CRX to fuel injection, you will need to gather a fuel injection system, which includes components like an intake manifold, fuel injectors, an ECU, a fuel pump, and necessary wiring harnesses. Remove the carburetor and install the fuel injection manifold, ensuring proper sealing and fitment. Next, install the fuel pump and lines to supply fuel to the injectors, and wire the ECU to control the system. Finally, calibrate the ECU for optimal performance with the new fuel injection setup.


What should your fuel pressure be in my 1986 Honda CRX?

The fuel pressure for a 1986 Honda CRX should typically be around 38-44 psi (pounds per square inch) with the engine running. It's important to check the specifications for your specific engine variant, as slight variations may exist. If you're experiencing issues with fuel pressure, it's advisable to inspect the fuel system components, including the fuel pump and pressure regulator.


Where is the fuel pump on 92 Honda CRX?

there is no such thing as a 92 crx. the last year they made was a 91 then to replaced by the del sol in 92. but the fuel pump on a crx is in the tank which you have to drop down from its hangers, and it is bolted down by about 8 10mm bolts on the top of the tank.


How do I replace the fuel pump for a 1991 Honda CRX?

To replace the fuel pump on a 1991 Honda CRX, start by disconnecting the negative battery terminal for safety. Remove the fuel tank by draining it and disconnecting the fuel lines and electrical connections. Once the tank is out, access the fuel pump by removing the retaining ring on the fuel pump assembly, then replace the old pump with the new one. Reassemble everything in reverse order, ensuring all connections are secure before reconnecting the battery and testing the system.


Where is the fuel pump on a 89' CRX?

Fuel tank.


Does 1986 Honda CRX with a carburetor have a computer?

yes they do