In the 2004 Honda Pilot, the blend door is located within the HVAC (Heating, Ventilation, and Air Conditioning) unit behind the dashboard. To access it, you typically need to remove the dashboard and the HVAC assembly, as it's not easily reachable. The blend door controls the mix of hot and cold air that enters the cabin, allowing for temperature adjustments. If you're experiencing issues with temperature control, it may be due to a malfunctioning blend door or actuator.
You can find the 2004 Oldsmobile blend door behind the passenger side kick plate. Remove the kick plate to access the blending door.
Type your answer here... How to Replace a Lock Actuator | eHow.com go to eHow.com and type in Replace Honda pilot door Lock Actuator replacement
To remove the door panel from a 2003 Honda Pilot all the mounting screws must be found and removed. There will be 2 screws and 8 clips holding the panel to the door. After removing the screws the door panel will be able to be pulled off.
two
Our 2007 Honda Pilot does not have this feature. We manually lock the doors when we are in the car.
The blend door is electrically operated and the only way I know of to access it is to remove the dash board assembly.
The Blend air door is located inside the HVAC housing under the dash. Dash has to be removed to access.
cost repairing a 2004 honda accord lx front passager window and the door
My 2004 Honda Odyssey sliding door will not close all the way. I begin to close for 3 quarters of the way an then stops. I have to force it to close manuallt. Thanks
It isn't repairable ... it is a sealed unit and needs to be replaced.
6.5 inches.
Check the inside of the door. There should be a label there. I think it is 32psi but check the label.