0
It is right by your brake master cylinder. Both are located and attached directly to the firewall near where the driver sits and you steer your car. They are both aluminum colored cylinders that have opaque plastic reservoirs and hard metal hoses attached to them. Both use Honda brake fluid. DO NOT use anything else. These cars are choosy about what they will accept. It's much easier to just go with OEM parts and fluids.
What else can I help you with?
How do you convert a cable clutch to a hydraulic clutch in a Honda?
www.hasport.com has clutch master cylinder adapters. Here is the info from their page: "The new master cylinder adapter allows the use of a Honda-style or Wilwood clutch master cylinder to convert a cable transmission vehicle to a hydraulic setup."
Where is the clutch hose on a 1989 Honda Prelude?
On a 1989 Honda Prelude, the clutch hose is typically located between the clutch master cylinder and the clutch slave cylinder. The master cylinder is mounted on the firewall in the engine bay, while the slave cylinder is located on the transmission. The hose runs along the chassis, connecting these two components to facilitate hydraulic fluid transfer for clutch operation. Always refer to a service manual for precise locations and diagrams.
Where is the clutch slave cylinder fluid located on a Honda Civic?
The brake fluid for the entire system is added in the master cylinder container. The slave cylinder does not have its own reservoir.
Why does your clutch stick to the floor in a 92 Honda accord?
2 reasons: 1. There is no fluid in your master cylinder due to a leaking master cylinder or slave cylinder or 2. You blew your clutch
Where is Clutch Master Cylinder on a Honda Accord SE Year 2000?
its the brake resivior
How do i replace a clutch master cylinder in a 1996 Honda civic?
how difficult is it to replace the MS on a 1996 Honda accord
Can you adjust a clutch on 1987 Honda shadow 1100?
If there is a hydraulic master cylinder at the clutch lever (looks like the front brake) then...NO.
How do you replace the clutch master cylinder and slave cylinder on a 2005 Honda civic si?
To replace the clutch master cylinder and slave cylinder on a 2005 Honda Civic Si, start by disconnecting the negative battery terminal and removing the clutch fluid reservoir cap. Then, detach the hydraulic lines from both the master and slave cylinders, taking care to catch any fluid. Next, unbolt and remove the master cylinder from the firewall and the slave cylinder from the transmission. Install the new cylinders in reverse order, ensuring all connections are secure, and then bleed the clutch system to remove any air.
My Honda having problems with the clutch it won't shift properly and I have tightened the cable. What should I do next?
figure out how to change master clutch cylinder and slave cylinder,then bleed the system properly
Where is the master cylinder on 2003 Honda Odyssey?
Hi The master cylinder in the odyssey is where the break fluid tank it located under the tank
How do you install a slave clutch cylinder for a 1994 Honda civic ex v-tech?
The slave clutch cylinder on a 1994 Honda Civic is located inside the engine compartment. On the driver-side close the firewall. The clutch fluid should be drained. Remove the mounting bolts and clutch lines to replace the slave clutch cylinder.
Where do you add clutch fluid to a Honda Del Sol?
clutch master cylinder right next to brake fluid, the smaller one
