Timing belt.
Sledge hammer and a dent puller.
No, the backseat in a 2002 Lexus GS300 does not fold down. The design of this model does not include a pass-through or foldable rear seat feature, limiting the trunk's cargo access from the cabin.
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
How much labor is involved in replacement of an evaporator for a 1999 evaporator
A 2002 Ram truck does not have an expansion valve. The ac system uses an orifice tube that is made into the liquid line.
The best way to fix an expansion valve for the A/C system is to replace it. of course then you have to evacuate and recharge with freon.
Only as needed. The serpentine belts hold up well unless there is a problem with the belt tensioner or any of the driven accessories.
A knocking noise in the wheel well of a 2002 Lexus GS300 could be caused by several issues, including worn suspension components, such as struts or bushings, which can lead to excessive play and noise. It may also indicate a problem with the wheel bearings or loose brake components. Inspecting these areas for wear or damage is essential. If the issue persists, it's advisable to consult a mechanic for a thorough diagnosis.
On a 2002 Lexus RX300, the PCV (Positive Crankcase Ventilation) valve is located on the engine's valve cover. Specifically, it can be found on the driver's side, near the rear of the engine. You may need to remove the engine cover to access it easily. Be sure to check the valve and its hose for any signs of wear or blockages.
The 225/65R16 tire may not be suitable for a 2002 Lexus GS300, as this vehicle typically requires a tire size of 225/55R16 or 225/50R17, depending on the specific model and trim. Installing a tire with a different aspect ratio could affect handling, speedometer accuracy, and overall performance. It's best to consult the owner's manual or a tire professional for the correct specifications before making any changes.
You don't have what is called an expansion valve but you do have a fixed orifice tube installed in the liquid line coming from the condenser going to the evaporator..................