There is no ground wire. The casing of the starter itself is considered the ground.
Ex. If you take a battery and use jumper cables to touch the positive lead to the wire terminal on the starter, and then touch the negative terminal to the metal casing it will spin the motor.
the ground wire.
The Chevy starter does not have a ground wire, the starter grounds through the starter casing.
No, the starter casing acts as the ground.
there is no ground wire it is grounded through the case
There is no ground wire from the starter. You should have one large wire from the positive battery post that connects to the large stud on the starter solenoid and one small wire that attaches to the small stud on the starter solenoid.
the hot wire goes to the starter and the ground wire bolts to the engine block.
Yes
Follow the ground wire from the battery. The ground wire from the battery goes right into the starter/connected to the starter. Passenger side of the engine compartment under the engine.
The Chassis is the ground.
In a 1999 Dodge Avenger, the ground wire for the starter is typically connected to the engine block or the transmission case. This connection ensures a proper ground for the starter motor to function effectively. You can usually trace the ground wire from the starter to its attachment point on the engine or chassis. Make sure to consult the vehicle’s service manual for specific diagrams and locations if needed.
when your battery is good and starter doesn't turn over engine. try with booster cables directly from battery to starter to eleminate bad ground or positive wire connections.positive cable to positive connection on starter and ground cable to ground on starter and with jumper wire from positive connection on starter touch it to connector on starter from ignition switch . if your starter doesn't turn over , than you have a non working starter.
The starter should have two wires. The positive wire goes to the positive terminal on the battery. The ground wire can be grounded to anything that is metal.