In the 2001 Mazda Protege, the transmission plug is typically located on the side of the transmission case. It can be identified as a hexagonal or square-shaped bolt, depending on the transmission type. To access it, you may need to raise the vehicle and use appropriate tools to remove the plug for checking or adding Transmission Fluid. Always refer to the vehicle's service manual for specific details and instructions.
A 2001 Mazda Protege has a seal system, meaning the car does not have a dipstick to check the transmission fluid. It is best to take it to a dealership to have the fluid tested, but a person can check it by slightly pulling out the plug under the car, and see the condition of the fluid coming out of the plug.
.044
It goes through the dipstick..
Should be a plug at the side of transmission - fill to oil starts coming out of this plug
There is no stick on a manual transmission, you check the fluid with the fill plug
There is no stick on a manual transmission, you check the fluid with the fill plug
.044
A spark plug for a 2003 Mazda Protege has a 14 mm thread size, and a 19 mm reach. The gap is 1.1 mm.
2000 Mazda Protege 1.6L MFI DOHC 4cylThe Spark Plug Gap.044 (In thousandths of an inch)
AUTO - There is a dipstick. Looks like a oil stick. Manual - There is a check plug in the side of the tranny
.044
bottom of the radiator