I have a Mazda 323 1990 and the same problem. So far (as well as a full service) no-one has been able to diagnose but I have found someone on the web with similar problems and they advised that it could be the Coolant Temperature senosr or the oxygen sensor. The former can be tested with a scan tool and by comparing actual ambient air temp and the reading the CTS is giving. It should be within 2/3 degrees of each other. I understand the OS cannot be tested. If there is a problem the CTS needs to be changed.
No sorry they are completely different.
how do remove the brake drum on a 1991 mazda 323
Mazda 323 familia valve timing set up
114x4 thats what i was told on my mazda 323 '84
The speaker size for a 1992 Mazda 323 would be 6-1/2.
The Mazda 323 of that time from had a 1600cc engine but that isn't going to effect the issue of where to get a wiring diagram. Haynes makes a manual for the 1990-1994 Mazda 323. If you have a 1986-1989 Mazda 323, you will need to get a FSM (Factory Service Manual).
i need carburetors Mazda 323 1.5L rebuilding Harold E. Lozano P. harenlo@cable.net.co
bad alternater??short somewhere??when do they fade in and out?
The recommended brand coolant for use in a Mazda 323 Astina is Genuine Mazda Long Life Coolant. This can be bought at any Mazda dealership.
door seals are on outside of the doors and prone to perish and split causing water to enter
SAE 10W30
4stud vs 4 stud, yes it will, 4 stud vs 5 studd, it will not. for all the 4 stud Mazda 323(f) from by 88 up to 2001 will fit