Yes, a B20 transmission can fit a 1990 Integra with a B18A1 engine, as both engines are part of Honda's B-series family and share similar mounting points. However, you may need to ensure that the transmission's compatibility with the engine's wiring and sensors is addressed. Additionally, some minor modifications might be necessary to accommodate any differences in the transmission's specifications. Always verify compatibility with specific parts and configurations before proceeding with the swap.
Acura Integra had a B18A1 engine.
nop
It is a integra ls block b18a1 or b18b with a vtec b series head
a B18a1 motor w/142 hp and 127 pound of toque
Yes it will, both cars have whats called a B series engine.
If it's a 1990-1993 it has a b18a1, and if it's a 1994-2001 it has a b18b1, both the engines are 4 cyl. dohc 1.8 litre the difference is that the b18b1 has +20 horsepower than the b18a1
there really isnt. a 90-93 integra has the b18a1 engine and the 94-95 integras have the b18b1 engine. the only difference is some small wiring differences and sensors that were added to the 94-95 integras
I believe the crx si came with a d series engine, unless it was a jdm crx. basically if your crx has a single over head cam motor ( SOHC ) then it is D series which means no your crx tranny can not bolt up to an integra. Since integras are all B series engines or Dual over head cam ( DOHC ) usuall the b18a1 or b1 unless gsr .
Yes it can work all b series transmissions bolt patter are the same except the b20A on the ludes
b18c because is the type r motor with 195 horsepower and b18a1 is the ls motor with 160 hp
that means you are eff you see kayed
it depends wat u want to do. if u want stock,go for the b18a1, the stock engine that comes with the car. if u have money go for a b18c1 w/170hp or a b18c5 w/195 hp.