0
What else can I help you with?
How do you figure watts for 8 Ohm speakers?
The power rating of speakers has nothing specific to do with ohms. look at the Watts rating printed somewhere on the speakers
Will your speakers blow if your receiver is 160 watts per channel but your speakers are only 130 watts each?
It is unlikely that your speakers will blow if your receiver is rated for 160 watts per channel and your speakers are rated for 130 watts each. The receiver's maximum power output is a measure of its capability, but it does not mean that it will always output that amount of power. As long as you don't push the volume too high or introduce distortion, your speakers should be able to handle the power from the receiver.
How many watts should a receiver have for 2000 Watt Speaker system?
For a 2000-watt speaker system, the receiver should ideally have a power rating that matches or exceeds the speaker's capacity to ensure optimal performance and avoid distortion. A general rule of thumb is to aim for a receiver with a power rating of at least 50-75% of the speaker's wattage. Therefore, a receiver with around 1000 to 1500 watts would be suitable, depending on usage and listening preferences. However, it's also important to consider the impedance and efficiency of the speakers and receiver.
What size speakers should you use for my Yamaha natural sound av receiver HTR-5730?
Any speaker that has a RMS power rating (not peak or PMPO) of at least 100 watts, plus a subwoofer rated at a minimum of 200 watts should be sufficient.
How many watts to you need to have four speakers at 8 ohms each?
It depends on the power rating of the speakers. There is insufficient information in the question to properly answer it. Please restate the question.
A stereo receiver uses a current of 2.2 amps from a 120 volt line?
The mathematical formula to solve this is P= I x R In other owrds the amps x the voltage = watts. 2.2 amps x 120 volts = 264 watts
How many watts do factory speakers have in a 2010 corolla?
Speakers are measured in Ohms not Watts. Watts is the amount of power you will be supplying to the speakers. In my 2009 Corolla the speakers can handle at least 400 Watts as this is what my OEM JBL system is pushing.
What happens when two 250 watts speakers are connected in 75 watts amplifier in parallel?
They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
Do speakers wattage decrease over time?
On the contrary, they increase. My speakers were advertised at 750 Watts at time of purchase. However, a recent test at home measured it out to 1000 and increasing... Source: Many of my own speakers. <><><><><> Another answer: The advertised power rating is the design power rating. Often, there is margin, but that should not be counted on. Exceeding the rated power rating can damage the speakers. Also, power rating is based on all frequencies. Testing at one frequency is not the same as looking at the spectrum.
What happens when two 250 watts speakers are connected in 75 watts amplifier in parallel connection?
They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
Do speakers have watts?
No they don't.
Do you have a list of receivers that are compatibile with Bose 901 speakers?
Any receiver with regular speaker outputs and a power rating of 10 to 450 watts per channel will work. The active equalizer included with the 901s is optional and is designed for amplifiers with RCA tape loop or preamp out/ power amp input connections.
