Only TiVO brand DVR's are capable of that feature at this point in time. Hope this helps!
To record on an HDTV antenna, you'll need a digital video recorder (DVR) that is compatible with over-the-air signals. Connect the antenna to the DVR and set it up to scan for channels. Once set up, you can schedule recordings through the DVR's interface for your desired shows. Alternatively, some smart TVs have built-in DVR capabilities that allow you to record directly to an attached USB storage device.
Connect its input to the output of a cable box and DVR's output to your television. If you don't have a cable / satellite set-top box, and your DVR has a built-in TV tuner, connect its input to a coax cable from your wall (raw cable feed) or a TV antenna (over the air reception), and DVR's output to your television, then scan for available channels. You should be able to watch TV through the DVR and record TV shows onto it.
The Lorex will connect to your security DVR system, and will be a good choice for making backups.
Try hooking up the bunny ears terminal to the DVR and then the DVR to where the bunny ears connect to at the tv. Set your tv to channel three or four for reception. If you get reception, you should be able to record.
SCSI or HDMI cables are used for connecting your DVR.
If the operating system is compatible you will be able to connect the Touchsmart to a HD DVR unit.
Yes, you can record on a DVR using just rabbit ears (over-the-air antennas) as long as the DVR is compatible with the antenna signal. Many modern DVRs are designed to receive over-the-air broadcasts, allowing you to record shows from local channels. However, ensure that your DVR has a built-in tuner to process the antenna signal. Additionally, check the antenna's range and placement to ensure good reception for optimal recording quality.
You can connect the output of your DVR in a DVD recorder, such as the Samsung DVD-VR375. This will record your DVR programs directly to DVD.
Yes, simply connect it to the "off air ANT." cax input on the back of your DVR unit. Hope this helps.
Generally, you can't connect the output of a games console to a cable or satellite DVR. The DVRs normally don't have a video input and are built to record content only from the the broadcaster.
You cannot connect a DVR directly to the camera. You have to use a computer connected to the camera. And Configure the camera in the way it saves all data on the computer hard drive. After that you will have to configure the computer to save the data to the DVR after certain period of time.
No, most projectors do not have TV tuners. You will need to connect the antenna to a digital TV tuner, and then connect the tuner to the TV.