answersLogoWhite

0

To connect an RCA cable to an XLR cable, you must solder links one and three from the XLR together, and connect those two wires to the end of the RCA component, along with the second wire. It is very useful to use a diagram to make sure you connect the correct cables.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you connect a subwoofer to your amplifier?

Depends, Self powered or not? home or car? XLR or RCA? Speakon or TRS JAck? or simple speaker cable.


Which shops sell XLR to RCA connectors?

You can purchase XLR to RCA connectors from the Guitar Center website. Alternatively, you can purchase these connectors online from the Amazon website.


Why would a camcorder need an XLR adapter?

XLR is a type of audio connector used in professional audio and video equipment. The three pin XLR is used universally for microphone and single channel audio signals. An XLR adapter is used to connect a professional audio signal to an alternative format. On a camcorder, it might be used to connect a low cost microphone or radio microphone receiver to the XLR input on the camera. One might be used on the audio output of the camcorder to connect to a domestic audio input that uses phono or RCA connectors.


What does a XLR male to XLR female Microphone Cable do?

It is used to connect microphone to microphone preamplifiers.


How can I connect an XLR microphone to a 3.5mm input while ensuring phantom power is provided?

To connect an XLR microphone to a 3.5mm input with phantom power, you will need an XLR to 3.5mm adapter that also provides phantom power. This adapter will allow you to connect the XLR microphone to the 3.5mm input while ensuring that the microphone receives the necessary phantom power for proper operation.


What is the best way to connect a microphone with an XLR output to a device with a 1/4 inch input?

To connect a microphone with an XLR output to a device with a 1/4 inch input, you can use an XLR to 1/4 inch adapter or a cable with XLR on one end and 1/4 inch on the other. This will allow you to connect the microphone to the device and ensure proper audio transmission.


What does xlr cables connect to?

Between microphone and microphone preamplifier


Why do you need XLR cables?

To connect microphones to microphone preamplifiers


How can I connect an XLR microphone to my audio interface?

To connect an XLR microphone to your audio interface, you will need an XLR cable. Plug one end of the XLR cable into the microphone and the other end into the XLR input on your audio interface. Make sure to turn on phantom power if your microphone requires it. Adjust the input levels on your audio interface and computer settings to ensure proper recording levels.


What is the best way to connect a microphone with an XLR output to an amplifier using an XLR to amp cable?

To connect a microphone with an XLR output to an amplifier using an XLR to amp cable, simply plug one end of the XLR cable into the microphone and the other end into the amplifier. Make sure both devices are powered on and adjust the volume levels as needed for clear sound output.


How can I connect a microphone with an XLR output to a device with a 1/4-inch input?

To connect a microphone with an XLR output to a device with a 1/4-inch input, you will need an XLR to 1/4-inch adapter or cable. Simply plug the XLR end into the microphone and the 1/4-inch end into the device to establish the connection.


How can I connect two powered speakers, both are 1000 Watt?

RCA