No, you can use the VIDEO cable instead and just let the S-CABLE hang loose but the S-Connector/Cable will give a better picture so use it if you can.
1.for video composite cable yellow use rca male to rca male video cable. or component (recommended if tv has this input) 3 pairs of rca male to rca male video called rgb cable. 2. for audio out use pair of rca male to rca male cable.
To connect an RCA cable to an XLR cable, you must solder links one and three from the XLR together, and connect those two wires to the end of the RCA component, along with the second wire. It is very useful to use a diagram to make sure you connect the correct cables.
RCA wire, or RCA cable, is a type of electrical cable commonly used to transmit audio and video signals. It features a single connector at each end, typically color-coded in red and white for audio channels and yellow for video. RCA cables are widely used in home entertainment systems, connecting devices like DVD players, gaming consoles, and televisions. Despite the rise of digital connections, RCA cables remain popular for their simplicity and ease of use.
No. You would need a coaxial (preferably video) cable to connect a cable box to a VCR, unless your cable box has RCA outputs, which most don't.
Typical coax cable uses a different standard than RCA. You will need to use a converter box.
If your tv has RCA out, use that. If not, you could use an external digital cable tuner and connect that to your soundbar .
If you have a Connection for the psp svideo to composite you can use it to connect to the television, however the resulting output will not be in HD.
Assuming the source of the audio is an RCA female socket, (red and white colors) go to your local Radio Shack or other outlet and purchase Two (2) RCA,single male, double female "Y" cable adapters and Two (2) RCA stereo cables long enough for your needs. Connect each male adapter to your sound source and then connect the Red wire to one adapter and the White wire to the other adapter. Repeat this process with the other RCA cable. Connect one cable to your TV audio input and the second one to (I assume) to your amp. Enjoy!
To use analog 3.5 mm jack RCA cables and the PS4 optical audio cable, you will need a DAC; then your Logitech speakers should work.
Yes, you can as long as you have the coax cable connected to the VCR first and then to your TV. Some TVs have RCA A/V outputs also and you can connect a VCR to them. Even better is to use the RCA A/V connections from the cable box to VCR, VCR to TV.
You use the cable that came with the PS3 with the RCA A/V plug
If your TV has rca input jacks for video games, etc. then all you need is to connect to the output rca connection on the cable box and you are good. Just remember that you won't have to tune the TV to get the channels. You will have to use A/V mode all the time to watch your favorite shows.