The F Connector is a coaxial RF connector used for television. You can get help installing an F connector online from the electrical section of the 'About' website.
You need to get a job and convert your f-1 into an h-1.
F connector is a connector used for over the air transmissions.It is used for connecting set-top box on tv,cable transmissions,television transmissions and satellite transmissions.
I think it uses BNC connectors.
The UTP cable it uses an RJ-45 connector. For coaxial cable, it will be either an F connector or a BNC connector.
F-Series Coaxial Connector
The "F" connector is the most common type that is used on RG6 cable. This is the universal connector for home use of RG6 with antennas, CATV, satellite, and consumer electronics.
Use this equation to convert degrees Fahrenheit to Kelvin: [K] = ([°F] + 459.67) × 0.556
The connector you need is called a "F" connector. It can be done with hand tools but Radio Shack makes a CRIMPER and a STRIPPER for just this work.
In a 1994 Ford F-250, the spout connector is located near the driver's side firewall, typically on the passenger side of the engine bay. It is a plastic connector used for connecting a diagnostic jumper for setting the base timing. The spout connector usually has a green or blue color and is easily identifiable among the wiring harnesses.
[°C] = ([°F] − 32) × 5⁄9
Formula: [°F] = [K] × 1.8 − 459.67