No. You will need a external transmitter with a suitable antenna.
The number of ports on an antenna can vary depending on its design and intended use. Typically, an antenna may have one or multiple ports for transmitting and receiving signals, with common configurations including single-port, dual-port, or multi-port setups. For example, MIMO (Multiple Input Multiple Output) antennas often have multiple ports to enhance data throughput and reliability. Ultimately, the specific number of ports will depend on the antenna's application and technology.
If there are stations in your area, connect an antenna to it and go into the menu then select SCAN.
By remote antenna, do you mean Over The Air (OTA). For the OTA, some receivers have a coax port on the back, TV antenna, where you can connect an outside antenna. From the receiver menu, you can scan the OTA channels into the receiver once the receiver has found the OTA channels. If this is not what you are asking, please let me know. Thanks.
There are two main types of HD TV antenna: indoor and outdoor. To use an indoor antenna, one simply connects it to the relevant port in the back of the tv, switches it on at the mains and then proceed to find the correct channel settings. An outdoor antenna is generally placed on the roof or high up and may require masonry drilling and electrical connection, so is best left to the professionals.
Hertz Antenna is lambda by 2 antenna & marconi antenna is lambda by 4 antenna...
In the 2003 Audi A4, the antenna connection to the radio is typically located at the rear of the radio unit itself. To access it, you usually need to remove the radio from the dashboard. The antenna cable connects to a port on the back of the radio, often requiring a specific tool to safely detach the unit without damaging surrounding components.
An active antenna has a amplifier built in, a standard antenna does not. AKA powered antenna.
A passive antenna is an antenna that is not powered by an amplifier.
The possessive form for the noun antenna is antenna's.
A yogi is a directional antenna.
Install the antennae outside your home on the roof. Connect a coaxial cable from the antenna to the "ANT" port on the back of the Captive Works box in your house. Connect a coaxial cable to the "TV/VCR" port. Connect the other end to the television.