0
What else can I help you with?
How do you make your universal remote turn on and off any tv without programming it to the tv?
Universal remotes need to be programmed to the T.V. in order for the remote to work on the T.V.
What is the universal remote code for Sabre TVs?
I know this tv can be programmed with just about any universal remote or cable remote the onoly problem I've come across is once i programmed the remote and tv if i try to turn the volume up or down the channel goes up or down
How do you program a symphonic tv with a rca rcr612 universal remote?
To program a Symphonic TV with an RCA RCR-612 universal remote, there are four codes which you can try. Those codes are 1033, 1038, 1046, and 1047. To try the codes, press and hold the TV button on the universal remote. After you enter the fourth digit, the power light will turn on. Once the light is on, release the TV key. If the power light turns off, you have the correct code and can now use the remote. If the light blinks, it isn't the right code and you need to repeat the procedure until you find the right code for your particular TV.
What is the remote code for a Magnavox on a RCA remote?
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
RCA universal remote on-off light won't turn off and remote is frozen?
If an RCA Universal Remote's on-off light will not turn off and the remote is frozen, take the batteries out for a while. Then, put the batteries back in and try it. If it is still frozen, a new one might have to be purchased.
Do Sam-sung TV's turn on with a universal remote?
depends on if it is a flatscreen TV or not
How do I am program an RCA model RCRN04GR universal remote control?
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
Will a zenith TV with no remote work with universal remote?
Well the same thing happend to me cause well the remote "flew" out of my hand so i bought a GE universal remote, it works terribly, u have to hold down a button for three seconds to turn one channel and to turn the tv on and off...it may be the remote but im gonna try again....so hopefully this helped you!
How can you find the Sky remote control codes?
One can find Direct TV remote control codes by following instructions when setting up their TV. Turn the TV on and set the remote to "TV". If one does the setting up correctly, the TV will turn off when the code is right.
How to turn on locked tv with universal remote?
normally you press the power button on the tv. if that is not possible then grab the remote for that tv and press the power button on the remote control. in the case where neither of the first 2 suggestions did not worked or is impossible then i would say use a universal remote control with the learning feature. these types of remotes can turn on mostly any device with an ir sensor. just point and click. using a universal learning remote should solve this tv problem for you.
Do alkalis make a universal indicator turn green?
The alkali makes a universal indicator turn blue.
Need programming code for universal remote lax-max model li-z414 for Orion tv?
To program your universal remote LAX-MAX model LI-Z414 for an Orion TV, you typically need to follow these steps: First, turn on the TV. Then, press and hold the "TV" button on the remote until the indicator light turns on and then off. Next, enter the code for Orion TVs, which can usually be found in the remote's manual or online (common codes include 005, 006, and 007). Finally, press the "Enter" button to save the code, and test the remote to ensure it controls the TV. If it doesn't work, you may need to try other codes.
