There are several temperature sensors on the S-10. Are you talking about the Intake Air Temp (IAT)or MAT (Manifold Air Temp) sensor? are you talking about the Coolant Temp Sensor (CTS)? Are you talking about the Exhaust Gas Temp (EGT) sensor? The IAT/MAT is on the intake manifold before the throttle body. The CTS is on the front of the engine in the thermostat housing. The EGT (if equipped) is on the exhaust manifold close to the head. (So's the O2 sensor)
Temp sensor for the gauge.
The coolant temp sensor on a 2003 Chevy S10 V6 is located on the front of the intake manifold. To replace simply unscrew the old sensor and screw on the new one.
Yes.
it is under the distributor.
After the catalytic converter.
A short to ground. Check wiring/sensor for damage.
removed
Remove the tail gate then replace water temperature sensor.
If it has a 4.3L engine the temp sensor is located next to the thermostat housing.
It has 1 coolant sensor, 1 temperature sensor
2.2l is behind cat converter
The 1993 Chevy S 10 Blazer 4.3 liter engine temperature sensor can be grounded to the engine block. You can use the temperature sensor retaining bolts to ground the temperature sensor.