Yes. This car has a Serpentine belt.
Part Number-#DY5060955
there is no serpentine belt on an '86. there is a v-belt and a timing belt. the v-belt is tightened by moving the alternator. the timing belt is tightened by rotating the inner core of the tensioner. the inner core is eccentricly mounted, i.e. if you rotate it, the tensioner moves. there is a serpentine belt alond with two independent belts.
In the belt book at most autoparts stores have a diagram section for serpentine belt routing. I worked for Carquest for 2yrs and their books had them.
CHAIN - (Helpfull)
Sometimes when a serpentine belt squeals it's because it is too worn or lose to grip the pulleys properly. It could also just be that the tension needs to be adjusted. If the belt is getting worn out, it's best to replace it before you get stranded.
you need to rent a 'clutch fan removal tool' as regular wrenches are too thick.....Serpentine belt engines have a standard thread while v belt engines have reverse threads
I have seen on an Olds forum that the belt for the 86 olds 88 w/o a/c will work. It should be 75.5 in instead of 103 (the 1986 88 belt is 76.1 in)
That a tough one being that they started making the Taurus in 86 Maybe you ment 87? and like myself have lexdiscsik fingers? but basicly do one side at a time and referance the unassembled side. Take pictures too. Good luck Jerre
it has its own belt use the belt tentionadjuster located on the alt itself its a bolt
The length of the drive belt for a Ford LT 12 lawn mower is typically around 86 inches. However, it's always best to check the specific model's manual or consult a dealer for the exact specifications, as variations may exist. Additionally, ensure you verify the belt's width and type for proper fit.
NO. An 86 Escort is a 1st generation Escort and a 93 Escort is a 2nd generation.
Look up the '86 Ford LTD and '86 Dodge Daytona in the RockAuto.com parts catalog and compare the part numbers between the two cars to see which, if any, are interchangeable.
yes