0
What else can I help you with?
How do you install a bypass pulley on a 1990 Oldsmobile regency?
To install a bypass pulley on a 1990 Oldsmobile Regency, first, disconnect the negative battery terminal for safety. Remove the serpentine belt by loosening the tensioner pulley with a wrench, then take off the old pulley if it’s still attached. Install the new bypass pulley in place of the old one, ensuring it is securely fastened, and then re-route the serpentine belt over the new pulley. Finally, reconnect the battery terminal and check the belt alignment before starting the engine.
Installing belts in 99 Oldsmobile Cutlass?
Begin by loosening the tensioner pulley on your 1999 Oldsmobile Cutlass. Put your serpentine belt around the pulleys. Tighten the serpentine belt with the tensioner pulley.
Picture of 97 Oldsmobile achieva serpentine belt on the pulleys?
Serpentine belt and pulley diagrams at www.alldatapro.com
Can you bypass the ac pulley when changing a serpentine belt in a 1990 Chevrolet 2500 V8?
Yes, buy a belt for a 1990 2500 V8 that came without A/C if they made such a truck.
What size serpentine belt is needed to bypass ac on 1996 dodge caravan?
You can't bypass with a belt alone. You have to by a bypass pulley kit. The new pulley takes the place of the ac compressor and you use the same size belt.
How do you install ac compressor bypass pulley on 98 Dodge Grand Caravan?
To install an AC compressor bypass pulley on a 1998 Dodge Grand Caravan, first, disconnect the negative battery cable and remove the serpentine belt from the AC compressor. Then, unbolt the AC compressor to access the mounting area for the bypass pulley. Install the bypass pulley in place of the AC compressor, ensuring it is securely fastened. Finally, re-route the serpentine belt around the new pulley and reconnect the battery cable.
How do you change a serpentine belt on a 1990 Cadillac Sedan Deville?
changing serpentine belt and pulley 90' sedan deville
How can you bypass a air conditioning compressor pulley on a 1997 Pontiac Bonneville?
Google Pontiac boneville ac compressor bypass pulley. There are a few places that sell a replacement pulley that goes in the spot of the compressor that allows use of the original serpentine belt.
Is there a tensioner pulley on a 1992 cavalier 4 cylinder for changing the serpentine belt?
Open the hood and look. If it has a serpentine belt there is a tensioner.
Can you bypass ac compressor pulley on 1998 Ford F-150 with 4.6?
Try this website. You can bypass the AC with this bypass pulley bolted on and use the same serpentine belt as before. http://www.1aauto.com/1A/ACBypassPulley/Ford/FSeriesPickup/1AEPM00022/481685 JS
Changing serpentine belt on a Kia Sedona?
from the bottom 13mm loosen idler pulley bolt then turn adjuster bolt under pulley
How do you replace a tensioner pulley on a 2000 Oldsmobile intrigue?
To replace the tensioner pulley on a 2000 Oldsmobile Intrigue, first, disconnect the negative battery terminal for safety. Then, use a wrench or socket to relieve tension on the serpentine belt by turning the tensioner pulley counterclockwise. Remove the old tensioner pulley by unbolting it and then install the new pulley in its place, securing it with bolts. Finally, reattach the serpentine belt, ensuring it's properly aligned, and reconnect the battery terminal.
