That means you have a problem with the ABS. Take it to an agency to check it.
The abs light came on because there is a problem with the abs ( Anti-lock Brake System). The abs light will not reset until the problem has been fixed. Once the abs system is repaired the light will reset itself.
The ABS computer has detected a malfuction and set a code.
ovp relay
You may have damaged an ABS sensor or ABS sensor wiring. Go back and check each wheel.
Assuming they came on at the same time, scan the ABS computer for codes to help narrow the focus.
AnswerWhen light is on bring it to a shop that has an ABS scannerit happened the same to my 99 beetle i scanned it and the code came up to be abs pump, i replaced it with a used part but light still on. if you plan it to do it your self you need to be really prescise when thighing those line bolts i already screw one of them and had a leak, had to use the old block with the new pump.but my abs light still on. could be a faulty part. but i figured there is an abs relay on the firewall. will try that tomorow.
There could be something wrong with the ABS system and check the ABS sensors on all wheels. Also check the connections to the ABS unit and the traction control button.
If the ABS light came on after changing the brakes in your 2003 Suzuki Aerio SX, it may indicate an issue with the ABS system or a sensor. First, check that the brake pads and sensors were installed correctly and that there are no loose connections. You can try resetting the ABS light by disconnecting the vehicle's battery for about 10-15 minutes. If the light remains on, it's advisable to have the ABS system diagnosed using a scan tool to identify any fault codes.
The ABS light is on because there is a problem with the ABS. The ABS will not function when the light is on. The light will remain on until the problem is fixed.
The ABS Light came up in my Toyota Alex car what should the Mechanic verify and replace
more than likely a scan tool will have to be used, to clear the code that was set , when the ABS light came on.
check brake light switch under pedal . It might have came loose from bracket