Dexron III and Dexron VI are not completely interchangeable. While Dexron VI is backward compatible with Dexron III, using Dexron III in a vehicle designed for Dexron VI may not provide optimal performance and could lead to potential issues. It's always best to follow the manufacturer's specifications for Transmission Fluid to ensure proper function and longevity.
You can ALWAYS use Dexron 6 in any system that calls for lower number Dexron. You can NEVER use lower number Dexron than what the system calls for. I hope this helps.
Yes dextron 6 can be used in applications otherwise requiring dextron 3
There is no such oil as Dexron 4, there is Dexron 6 (VI).
The difference between dexron 3 g and dexron 3 h is that dexron 3 g is used to be the factory fill quality. Dexron 3 g was the requirement for service fill quality.
dexron 3 replaces dexron 2, so you could mix them but the dexron 3 is better
Dexron 3 transmission cannot be used to replace Dexron Type A because they are not compatible. They are designed for use in different applications.
Trasmission fluid is Dexron 3.Trasmission fluid is Dexron 3.
Your transmission takes Dexron 3. Make sure you check it with the vehicle in park when the car is warmed up. The fact that it has overdrive does not matter, it is still Dexron 3, sometimes marker Dexron 3 / Mercon.
Dexron III/Mercon automotive transmission fluid (ATF) is generally recommended as a replacement fluid for automatic transmissions meeting original equipment manufacturers (O.E.M.) performance requirements for current General Motors, Ford, other domestic and imported passenger cars, vans and light trucks where DEXRON II, DEXRON II-E, DEXRON III, AND Ford/MERCON fluids are specified.Dexron VI is a partial synthetic which properties exceed dexron III by 100% in every area. Dexron VI can not be interchanged or repalced with DEXRON II, DEXRON II-E, DEXRON III, DEXRON-III/MERCON.
Yes, Dexron III is generally compatible with Dexron VI. Dexron VI is an upgraded version with improved properties, and it can be mixed with Dexron III without issues, although it's always best to use the recommended fluid for optimal performance. However, for the best results, particularly in high-performance or high-temperature applications, it is advisable to fully replace the old fluid with Dexron VI. Always check the manufacturer's specifications for your vehicle to ensure compatibility.
Dexron 3 or Dexron 4.
honda passport's transmissions were made by GM , only use a dexron 3 (if you can find it) the alternative would be a dexron 6 ( works great on mine.)