0
Dexron III/Mercon automotive Transmission Fluid (ATF) is generally recommended as a replacement fluid for automatic transmissions meeting original equipment manufacturers (O.E.M.) performance requirements for current General Motors, Ford, other domestic and imported passenger cars, vans and light trucks where DEXRON II, DEXRON II-E, DEXRON III, AND Ford/MERCON fluids are specified.
Dexron VI is a partial synthetic which properties exceed dexron III by 100% in every area. Dexron VI can not be interchanged or repalced with DEXRON II, DEXRON II-E, DEXRON III, DEXRON-III/MERCON.
What else can I help you with?
Are dexron 3 and 6 interchangeable?
Dexron III and Dexron VI are not completely interchangeable. While Dexron VI is backward compatible with Dexron III, using Dexron III in a vehicle designed for Dexron VI may not provide optimal performance and could lead to potential issues. It's always best to follow the manufacturer's specifications for transmission fluid to ensure proper function and longevity.
Can you use Dexron II instead of dexronIII?
While Dexron II and Dexron III are both automatic transmission fluids, they are not fully interchangeable. Dexron III is an upgraded formulation with better performance characteristics, including improved oxidation resistance and thermal stability. Using Dexron II in place of Dexron III may lead to suboptimal performance and potential damage to your transmission. It's best to follow the manufacturer's recommendation for the correct fluid type.
What is the different between dexron iii at and sp iii at if you replace sp iii to dexron iii at will there be any problem with your gearbox?
The major difference between SP iii and Dexron iii is the lubrication modifier. SP iii contains more lubrication qualities than Dexron iii. You can interchange the two but run a slight chance of premature wear using Dexron iii where SP iii is indicated.
Is it better if I use Dexron III ATF instead of Dexron II in old made 1990 Toyota cars?
Better or not, really isn't the question. Dexron-II has been replaced by Dexron-III. Any transmission that used Dexron-II can now use Dexron-III. Fluids labeled Dexron-III/Mercon are also acceptable.
What is the equivalent hyd fluid to Dexron III?
Dexron III is itself an hydraulic fluid. The issue is, not all hydraulic fluids are equal in quality. General Motors recommends replacing the discontinued Dexron III with Dexron VI
Is dexron 111 and dexron v1 the same?
No, Dexron III and Dexron VI are not the same. Dexron III is an older transmission fluid specification, while Dexron VI is a more advanced formulation that offers improved performance and protection. Dexron VI is backward compatible, meaning it can be used in applications that originally required Dexron III, but the reverse is not true. Always check manufacturer specifications to ensure the correct fluid is used for your vehicle.
What transmission fluid is used in a 1965 buick special?
Dexron III can be used and you can also use the newest Dexron VI which is backward compatible and provides more protection than Dexron III.
What type of transmission fluid does a 1992 Honda Accord EX use?
Honda originally specified Dexron II for that transmission. Dexron II no longer exists, as it was later superceded by Dexron III. So, use Dexron III. You will frequently see bottles of ATF that say "Dexron III/Mercon" or "Dex/Merc" for short. That's the stuff to use.
Is Dexron III fluid synthetic?
yes
What type of transmission fluid does a 1995 c1500 take?
dexron III or dexron IV can be used
What kind of power steering fluid is used in a 2000 Chevrolet Malibu?
Dexron III. You can Dexron, Dexron II, Dexron IIE, Dexron III, and Dexron V as suitable substitutes depending on availability. Lower numbers indicate a shorter lifespan of the fluid before you need to change it. Do no use Dexron IV (aka Manual Transmission Fluid) as this is likely to cause problems.
Can Dexron-III replace Dexron-II?
Yes. Dexron III/Mercon automotive transmission fluid (ATF) is generally recommended as a replacement fluid for automatic transmissions meeting original equipment manufacturers (O.E.M.) performance requirements for current General Motors, Ford, other domestic and imported passenger cars, vans and light trucks where DEXRON II, DEXRON II-E, DEXRON III, AND Ford/MERCON fluids are specified.
