0
What else can I help you with?
What is the torque on intake-manifold bolts on 460 engines?
Intake Manifold torque is 30 ft/lbs on the 460 Ford V8Valve cover is 10 ft/lbs
Will a 460 fuel injected intake manifold bolt up to a 70s 460 motor?
No. Intake ports will not match up.
Which valve is the intake valve on number 1 cylinder for a 460 Ford engine?
the valve on intake port side and exhause valve on exhaust manifold side.
What is the firing order of a 1996 ford 460 engine?
If you look on the intake manifold of any engine you will find the firing order.
What is location of the oil pressure sending unit on Ford 460 cu?
Behind the intake manifold in the center of the engine block.
Will a 460 auto transmission fit a 351 motor?
351 M yes 351 W No, you may need to change the output shaft because the 460 had a couple of options...
Does a 351 windsor bell housing bolt pattern match a 460?
no 351 windsor engine is small block. 460 is a big block
Can you replace 4 barrel carb with 2 barrel carb on ford 460?
Yes , but you would have to change the intake manifold also
Would a 1989 ford 460 engine have fuel injection?
AnswerThis is the 2nd year that Ford put the Fuel Injection on the 460 Engine. All you have to do is look for the Fuel Injectors on the Intake Manifold. There are 4 of them on each side.
Where is the Location of map sensor on 1994 460 ford?
The map sensor is located on the intake manifold of a 1994 Ford. It could also be located on the plenum by the throttle body.
How much does a Ford 351 Windsor weigh?
289 ford weighs 460# 351 frod weighs 520# with iron heads
Will a 4 speed out of a Ford F-250 with a 460 cid engine fit a ford f-150 with a 351 HO cid auto trans?
No. You need a transmission for a 351 (5.8L) windsor, 302 (5.0L) or 300 (4.9L)6 cylinder. The 460 Trans will fit a 460, 429, 400, or 351 M or Modified. The 351M is a big block. Your 351 HO is a 351 W or Windsor. It's a small block.answernot all ho were windsor but you may have to change bell housing then it will fit
