0
What else can I help you with?
Where is the tension release for the alternators belt?
If it is a drive belt and not a serpentine belt is has no tensioner. You manually adjust the tension by normally adjusting tension by moving the alternator. Loosen to bolts holding the alternator in place and then adjust the tension. Tighten the bolts when the tension is right. If it is serpentine belt if you follow the belt around the the engine you will see the tensioner.
How do you tension serpentine belt on Nissan zd30 engine?
The zd30 has a hydraulic tensioner using an idler pulley to automatically tension the serpentine belt.
Where are the bolts needed to tighten the v-belt located on a 98 Plymouth Voyager with 3.0 engine?
if it is a serpentine belt, there is a tension pully that keeps it tight if is a v blet , u generally adjust the tension by moving the alternator
How do you loosen and adjust the tension pulley for the serpentine belt on a 1990 Chevrolet pickup with a 350 engine with ac?
Some have a indent that fits 3/8 ratchet on base of arm
Should serpentine belts be hot to the touch?
yes the serpentine belt will be hot after running engine
How do you adjust the tension pulley on 1991 cavalier?
To adjust the tension pulley on a 1991 Chevrolet Cavalier, first, ensure the engine is off and cool. Locate the tensioner pulley, which is typically near the serpentine belt. Use a wrench or socket to turn the tensioner bolt counterclockwise to relieve tension on the belt, then adjust the pulley as needed. Once adjusted, make sure the belt is properly aligned and retighten the tensioner bolt to secure it.
Where is the serpentine belt tensioner on a 94 Jeep Grand Cherokee 5.2 v8?
On a 1994 Jeep Grand Cherokee with a 5.2 V8 engine, the serpentine belt tensioner is located on the front of the engine, near the center. It is typically positioned above the crankshaft pulley and to the right of the alternator. The tensioner is a pulley mounted on a spring-loaded arm, which maintains tension on the serpentine belt. To adjust or replace it, you may need to use a wrench to relieve tension before removing the belt.
How do you adjust the belt tensioner on an Isuzu pickup?
To adjust the belt tensioner on an Isuzu pickup, first, locate the tensioner pulley, typically found near the front of the engine. Use a wrench or a socket to turn the tensioner counterclockwise, which will relieve tension on the serpentine belt. If your model has a manual tension adjustment, adjust the tensioner according to the specifications in the owner's manual, ensuring the belt has the correct tension. After adjustments, double-check the belt alignment and tension before reassembling any components.
How do you adjust the serpentine belt tension on your 1992 town car which you think is causing engine to die when you turn on heat and fan?
Serpentine belts have an automatic tensioner, which cannot be adjusted. But your problem sounds like poor alternator performance, have it checked, at your local parts store most do it for free.
How do you check the engine belt tension pulley?
There are a few different ways to adjust the drive belt or V-belt tension in a vehicle. The most popular used nowadays is a serpentine belt that connects to and activates every pulley in the engine. These serpentine belts require no tension adjustment as they incorporate an automatic belt tensioner. This type of tensioner has an internal pre-set spring and applies the correct amount of tension to the belt. Some older vehicles and some imports may use a combination of V-belts and serpentine belts in offset pulleys still controlled by the crankshaft pulley. Most often, there are belt tensioners on these vehicles that allow proper tension to be adjusted.
Have a high pitch squeal coming from the engine belt in a 96 Saturn sl2 regardless if its running or idling hot or cold?
You may need to adjust the tension on the belt.
How do you remove serpentine belt on a 95 ford escort?
The alternator is usally on an adjustable slide mounted to the engine. If you adjust the alternator on that slide to take the tension off the belt you should be good to go to put the new belt on. The routing diagram for routing the serpentine belt should be on a placard mounted under the hood on the frame. It should also be in your user's/maintenance manual. Make sure to adjust the alternator properly on its slide mount so that there is sufficient tension in the belt.
