NOT RECOMMENDED, but yes it can be done. You have to get vehicle speed and engine speed at the right level and it will work. Same principle as truck drivers use.
Yes. It probably isn't good for the transmission but I had to do that last weekend.
My cluch cable broke. My girlfriend, girlfriend's sister, and brother in law were all in the car and it was pouring rain on a Friday night. I pushed the car up to a speed that was compatible with second gear, then put car back into gear without the cluch, and drove home and swapped cars.
I have heard stories of people with broken clutch cables actually starting the car in gear.
Yes.
However it is somewhat tricky, and you risk damaging the transmission. Every so often I don't use the clutch in my Honda civic and it works fine. Mostly because I just forgot to clutch it.
So I tried driving around without clutching.. not really a good idea, I ground the gears a few times, after doing that for awhile, and going back to clutching it the tranny didn't like that too much 1-2 shifts were kinda tough for a bit. Its possible I beat up the syncros doing that.
You have not pressed the Clutch peddle to change the gears!!
Slowly and if you are good you can change gears without using the clutch. Takes a little practice and a good ear or feel for when the engie is running at the speed to change without the clutch.
Clutch needs adjustment/replacement Synchonizers worn?
It's a transmission where the gears do not change themselves, but have to be changed with a gear shift and a clutch.
There are three main types of gear shifters for vehicles: manual, automatic, and semi-automatic. Manual shifters require the driver to manually change gears using a clutch pedal and gear stick. Automatic shifters change gears automatically without the need for manual input. Semi-automatic shifters allow the driver to manually shift gears without a clutch pedal, using paddle shifters or buttons on the steering wheel.
Most likely the clutch-look at disc surface.
CLutch is buggered or might just be the clutch cable
Manual transmission is a stick shift. You have to manually change the gears using the shifter and the clutch.
read the instruction manual in the book. or hold the clutch button down while u change gears. pretty simple
When you press down the clutch pedal in a vehicle with a manual transmission, you disengage the engine from the wheels, allowing you to change gears smoothly. This action temporarily interrupts the power flow, enabling you to shift gears without grinding or damaging the transmission. It’s a crucial step for starting, stopping, or accelerating without stalling the engine.
If it is an automatic transmission, the speed of the engine (in rpm) is what makes the gears change. Accelerate too much and it will fly up through the gearbox when it is not supposed to. If it is a manual transmission, the gears shouldn't change without the clutch being depressed and you manually changing gear; at most, it will simply disengage and cease turning the wheels.
In a car with a manual transmission the driver not only has to choose between the different forward gears(4-6 of them) himself, he also has to operate the clutch, the gadget that momentarily separates the gearbox from the engine in order to change the gears.