0
Not unless the circuit was built for a 15 amp load. Too large of a load in an electrical circuit can cause a fire. Answer 2 - More ExplanationThe following answer is a cut and paste from my previous answer to several similar questions.
Fuses That "Blow" Repeatedly
Without being able to "hands on" troubleshoot the circuit served by the repeatedly blowing fuse, none of us can identify the specific cause/defect which is causing your problem.
Therefore, the following generic answer can be applied to any electrical circuit, whether in a vehicle, or in a building, or whether alternating current [AC] or direct current [DC].
Fuses [and Circuit Breakers] are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] and other components from short circuit conditions and/or overload conditions which cause an extremely large flow of electrical current [measured in Amperes], which causes overheating of the conductors that results in damage to the insulation and the conductors.
And in a worst case scenario, the probability of a FIRE which could destroy the vehicle, house, or other structure in which the circuit is located.
When a fuse or Circuit Breaker [and replacement fuses, or "tripping" Circuit Breakers] "blow," especially if it happens repeatedly, is an indication of an UNSAFE CONDITION in that circuit, usually a short.
The fuse or circuit breaker is doing what it was designed, intended, and installed to do, protect the conductors and components of the circuit which it serves.
The proper "fix" is for a qualified technician, who knows what he or she is doing, to troubleshoot the involved circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with the properly sized fuse or before resetting a circuit breaker].
Some ignorant people will suggest installing a larger fuse or breaker to solve the problem, BUT that will only increase the hazard, not correct it. Do not follow "bad" advice by installing a larger fuse in a misguided attempt to correct the problem. To install an over-sized fuse would almost guarantee damage to the wiring and an electrical system fire.
What else can I help you with?
Can you replace a 15 amp fuse with a 10 amp?
Yes, but it may blow if the load draws more than 10 amps.
What will happen if you replace a 10 amp fuse with a 15 amp fuse?
You risk too much current flow in the circuit. Overloading the wiring can cause a fire.
Can you replace a 15 amp fuse with a 10 amp fuse?
not smart to do it cant carry the load of the circuit it will blow. in emergency maybe but never go with a higher rating
Can you replace a 15 amp fuse in your car with a 20 amp fuse for a cigarette lighter It keeps blowing the 15 amp?
No, you could overload the wiring and start a fire.
Can you replace a 15 amp fuse for fridge with a 20 amp fuse?
no you cannot, it is dangerous, you need to have a 20 amp service installed in order to do that. hope i helped
What number fuse for headlamp 97 explorer?
( # 4 ) is a 10 amp fuse for the left headlamp , ( # 8 ) is a 10 amp fuse for the right headlamp and ( # 33 ) is a 15 amp fuse for the high beam headlamps
What are the correct fuses to use in the fuse box of a peugeot 205 gti 1.9 1989?
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
Can I replace a 16 amp fuse with a 15 amp fuse?
No, as soon as you turn on the appliance the wire inside the fuse will melt as there will be too muck current flowing through it
Your 1987 Honda accord rear lights and dash lites stopped working - the rear directionals and reverse lights still work -- any ideas?
replace the 15 amp fuse replace the 15 amp fuse
Where is the instrument panel light bulb located in a 2001 Kia Sportage and how do you replace it?
Its a 15 amp fuse in the fuse box under the hood on the passenger side near the front. Its the only 15 amp fuse and it is in a clip. Remove the clip, replace the fuse and then reset the clip.
Can you replace a 30 amp fuse with a 15 amp fuse?
Not a good idea. The 15 amp fuse will be protection a #14 wire which is rated for 15 amps maximum capacity. By changing the 15 amp fuse to a 30 amp fuse you would then be allowing 30 amps maximum capacity on a #14 wire. By doubling the load the extra heat generated on the smaller wire could be enough to melt the insulation from the wire and that could cause the wire to short out. If the wire shorts out inside the wall it means the removal of the wall board to replace the wire to restore the circuit to an operational condition. The proper wire sizing for a 30 amp fuse is, #10 copper wire with an insulation rating of 90 degrees C.
Can you use a 15 amp fuse instead of a 10 amp fuse for your car gauges?
It is NEVER a good idea to use a higher value fuse. The reason for the 10 Amp fuse is that it blows at 10 amps which the wire and device being protected is designed to handle. If you substitute 15 amps and that amount of current flows in your device, it may destroy the device and other things in the path of the current.
