Yes the v6 engine has 6x1.1/2" and 4x1.1/8" welch plugs these are available in BRASS, PLATED STEEL and STAINLESS STEEL this information has been supplied by Graham Matthews Auto Products Australia's Premier manufacturer of welch plugs to the Australian and overseas markets for over 30 years
Holden is 13 years old when Allie dies. Reference : The Catcher in the Rye - Page 38
The freeze plugs on a 2003 Isuzu NPR typically have a diameter of 1.5 inches (38 mm). However, it's always best to verify the specific size by consulting the vehicle's service manual or a parts supplier, as variations can occur based on engine type or specifications.
you can either jack your van up, supporting it on jack stands & blocking the rear wheels,and using some extentions, universals & socket & socketwrench. you can get to them from the bottom. Or you could remove the wiper arms & cowl and get to the spark plugs from the top. brewski
From everything I see the 125 is a 42" mower with a 20HP engine. The STX-38 mowers were 38" with either a 12.5 or a 13HP engine. So, yes the 125 is bigger than the STX-38.
No, not unless you want to destroy your engine.
A wiring schematic for a ford 38 engine can be found through Ford related service manuals. The manuals depict the original factory placements of the harness and parts of the engine.
38 - 46 quarts, depending on what the engine is.
If it's points or a Dyna S ignition you set the plugs at 28, other wise you set the plugs between 38 - 40
I use 38 thou
I need to know
Thomas the Tank Engine and Friends - 1984 The Tortoise and the Hare 10-38 is rated/received certificates of: Australia:G
code e38