some one on the web reckons its 495cc of oil 10w. in each leg
The Yamaha DT125 typically requires about 150 to 180 milliliters of fork oil per leg, depending on the specific model and year. It's essential to check the owner's manual for the exact specifications for your particular model. Additionally, using the recommended fork oil type and viscosity will help ensure optimal performance. Always remember to replace the fork seals if they are worn or leaking when servicing the forks.
vl250 fork oil quantity
398cc per fork.
I think 1L to 1.5L will be the quantity.
For a 1979 Suzuki GS425, the recommended fork oil capacity is approximately 10.6 ounces (or about 315 milliliters) per fork leg. It's important to use the correct viscosity, typically 10W or 15W fork oil, depending on your riding style and preference. Always ensure to check the service manual for the most accurate specifications and consider any modifications that may affect the oil quantity.
It takes 5.6 oz of fork oil in each fork.
qt fork oil and type oil for the front fork on each side
about 430ml of 10w (manual says 5w but everyone is using 10w, even shops recommends 10w)
the front fork oil leval is to be set at 130mm from the top of the fork (air gap)..with the fork spring out ..and the fork fully collapsed ....
r1 fork oil capacity
400cc 5wt fork oil
fork oil amount yamaha thunderace