0
To find the timing marks on a Peugeot 106, first, remove the timing belt cover to access the timing belt. The marks are typically located on the crankshaft pulley and the camshaft gear; they are usually indicated by notches or lines. Align these marks according to the manufacturer's specifications to ensure proper timing. Always consult the vehicle’s service manual for precise locations and alignment procedures.
What else can I help you with?
How many liters is a peugot 106 radiator?
5,5 l
Where is the best place to but a used peugeot 106?
A peugot 106 can be found at a local retailer. They can also be found online when you research the product you can go to the peugot website to locate information on retailers.
What size torx bolt on 106 peugot head bolt?
the size is E14
What kind of gas mileage does the Peugot 106 get?
The Peugot 106 is listed as receiving 43 miles per gallon. However, it was not listed as getting this many on the highway or on regular roads, so the actual number may fluctuate.
Where do you find the paint color code on a peugot 106 1997?
I read in Haynes Peugeot 106 Modifying Manual that you find the paint code on the passenger outside (I think near the window) or lift the bonnet up and the code should be at the top of the bonnet (when open) Hannah
Where is the fuel filter on a peugot 106?
If it is a diesel, you have to take out the air filter compartment. You can see it then, It is on the left hand side
What is the cam timing settings for a peugeot 106 1.4 quicksilver?
The cam timing settings for a Peugeot 106 1.4 Quicksilver typically require the camshaft and crankshaft to be aligned using timing marks. The timing belt should be set so that the camshaft is at the TDC (top dead center) position for cylinder one, with the marks on the camshaft and crankshaft pulleys aligned correctly. Always refer to the specific service manual for precise specifications and procedures, as variations may exist based on the engine variant.
What mileage do you change timing belt on a peugeot 106 diesel?
timing belt changes are every 70k on 106 d
What is the ignition timing on a Peugeot 106?
its set by the ecu
What is the tightening sequence for head bolts on a peugot 106 1.1?
The tightening sequence for the head bolts on a Peugeot 106 1.1 is to begin at 1 and of the head. Move to the opposite end of the head. Alternate back in forth until you reached the middle.
Where are the timing marks on a 1.1 peugeot 106 r reg?
there is one hole next to block for bottom end timing then the cam is a 10 mil hole that lines up with the hole on the belt end there is a bolt behind the cam wheel toward the front of engine hope that helps
Where is fuse for the back brake lights located on a peugot 106?
Behind the glove compartment 30 AMP (GREEN) FUSE 4th fuse from the left bottom row F9
