Brake light switch, goto your Hyundai dealership, buy the part for $15 and install it
it would be the brake light switch about 20 dollars at autozone
Brake lights not working in a 2002 Hyundai Santa Fe could be caused by a blown fuse, a faulty brake light switch, or burned-out bulbs. First, check the fuse box for any blown fuses related to the brake lights. If the fuses are intact, inspect the brake light switch, located near the brake pedal, as it may be malfunctioning. Lastly, ensure the bulbs themselves are functional and properly seated in their sockets.
There should be a fuse for the brake lights. If the fuse is good always check the ground wire.
Chjeck the brake light switch located somewhere on the brake pedal lever.
In a 2002 Hyundai Accent, the fuse for the dome light is located in the fuse box under the dashboard on the driver's side. To access it, remove the cover of the fuse box and look for the fuse labeled for the interior lights or dome light. If the fuse is blown, replace it with a new one of the same amperage to restore functionality. Always consult the owner's manual for specific fuse locations and ratings.
what number fuse is for the brake lights on a 99 vw passat what number fuse is for the brake lights on a 99 vw passat
Fuse 7 controls the brake lights. It should be a red 10amp fuse.
What fuse controls the brake lights on a 1998 Chevy Camaro? It should be labeled on the fuse block.
if you 3rd brake light still works it is most likely a fuse. If none of your lights work usually it is the brake light switch located on the top of the brake pedal. Although there could be some odd wiring issue. Chances are it is the switch.
One fuse controls the function of the hazard, reverse, and turn signals of the car. When there fuse blows all the components stop working.
should be the tail lights fuse