0
This is for the passenger side headlight assembly in a 1998 Grand Am SE. Fairly certain they are identical to the GT. The driver's side is has a plastic cover that must be removed first, so the setup underneath may or may not be different... Remove the three 10mm hex bolts from the top of the headlight assembly holding it to the vehicle. The middle bolt has a bracket connecting it to the vehicle by a fourth hex bolt, which you may need to loosen to move the bracket out of the way. Pull the headlight assembly forward until you can access the bulbs. They can be removed from the assembly by a quarter turn, then unclip the faulty bulb and replace.
What else can I help you with?
How to remove the headlight assembly in a 1998 Mitsubishi eclipse?
Begin by removing the wiring harness from the back of your headlight. Remove the headlight assembly retaining bolts. The headlight assembly will come out.
How do you remove the headlight assembly located on a 1998 Cadillac cts?
There is no 1998 CTS
How do you remove headlight assembly on a 1998 Jeep Grand Cherokee?
Here is a guide to follow: http://98jeepbuild.blogspot.com/2009/06/cant-see.html
How do you change a headlight on a 1998 Pontiac Grand Am?
are you trying to change the entire headlight assembly? or just the bulb.
How do you remove headlight assembly 1998 Lincoln town car?
you have to remove the black plastic cover over the headlight and there are 3 tent lik stacks you pull up an out and your headlight is out
How do you remove headlight from a 1998 eagle talon?
To remove the headlight from a 1998 Eagle Talon, first, open the hood and disconnect the negative battery terminal for safety. Next, remove the screws or bolts securing the headlight assembly—typically located at the top and side of the assembly. Gently pull the headlight forward, disconnect the wiring harness, and then take out the headlight. Reverse the process to install a new headlight.
How do you replace the headlight assembly of an Acura Integra 1998?
The headlight assembly on a 1998 Acura Integra is held on by brackets. To remove them loosen the bolts on the brackets. Pull the housings off. Install the new housings by placing them on the brackets.
What is involved in taking off headlight assembly on a 1998 Aurora?
To remove the headlight assembly on a 1998 Oldsmobile Aurora, you’ll need to start by disconnecting the battery to ensure safety. Next, remove the screws or bolts that secure the headlight assembly, which are typically located at the top and possibly on the side of the assembly. After removing the fasteners, gently pull the assembly forward to disconnect the wiring harness and remove it completely from the vehicle. Finally, replace or service as needed before reinstalling the assembly in reverse order.
How do you replace the headlight assembly located on a 1998 Isuzu trooper?
To replace the headlight assembly on a 1998 Isuzu Trooper, first, open the hood and remove the screws or bolts securing the headlight assembly, typically located at the top and side. Disconnect the wiring harness from the back of the assembly and carefully pull the old assembly out. Insert the new headlight assembly, reconnect the wiring harness, and secure it with the screws or bolts. Finally, test the new headlight to ensure it functions properly.
How do you replace head light bulbs on 1998 Chevy s-10?
Open the hood and notice the two black locking tabs sticking up behind the headlight assembly. Remove those two tabs by pulling on them straight up. This will allow the complete headlight assembly to come out the front. You can now remove the headlight bulbs from the headlight assembly.
How do you remove head light assembly on 1998 gm pick up truck?
Open the hood there are to locking pin above each headlight assembly. Turn them you unlock them and pull the up. Once they are removed the headlight assembly can be removed.
How do you change the horn on a 1998 Grand AM GT and where is it located?
The horn is located behind the drivers headlight. To remove unplug harness, undo bolt in bumper assembly behind drivers headlight (must be removed first), and it slides out. To install new, follow steps in reverse.
