1997 Lexus LS400 headlight bulb lamp replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Yes you can just replace the headlight bulbs. First you have to take out the cover by the battery. Then unscrew the cover by the radiator and simply lift it up to take it off. The light bulbs are visible at this time.
Around 56K. You can download a 1997 flyer on the Lexus website.
gonna need more information before i can answer this one.
i am trying to replace the belt tensioner on my 1997 ls400 , i got everything loose but there is a plastic seal right in front of it , it is holding the tensioner and there is where i got stuck , can someone tell me how to get the tensioner out without removing the plastic seal . thanks
To replace the parking light bulbs, remove the screw on top of the headlight and pop out the clearance light. The parking light bulb will be accessible after this removal.
poo
In a 1997 Lexus LS400, the fuse box is located in two places. The primary fuse box is under the dashboard on the driver's side, near the steering column. There is also a secondary fuse box located in the engine compartment, near the battery. For detailed access, it's advisable to consult the owner's manual for specific locations and diagrams.
Begin by removing the wiring harness from the back of your 1997 Pontiac Bonneville headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight.
1990-1994 = 250hp 1995-1997 = 260hp 1998-2000 = 290hp 2001-2006 = 290hp 2007-present = 380hp
In a 1997 Lexus LS400, there are typically four O2 sensors located in the exhaust system. Two are positioned upstream (pre-catalytic converter) and two downstream (post-catalytic converter) of the catalytic converters. The upstream sensors monitor the air-fuel mixture, while the downstream sensors check the efficiency of the catalytic converters. Accessing them usually requires lifting the vehicle for better visibility and reach.
There are 4 screws located under the rubber on the edges of the headlight. These have to be removed in order to get the headlight out.
You replace the bulb the same as a 1998, which is answered further down the page.