To add Transmission Fluid to a 2003 Ford Explorer, first ensure the vehicle is on level ground and the engine is running. Locate the transmission dipstick, usually found near the back of the engine compartment. Remove the dipstick, wipe it clean, insert it back, and then pull it out again to check the fluid level. If low, use a funnel to add the appropriate type of transmission fluid through the dipstick tube, checking the level periodically until it reaches the correct mark.
Need to remove a quart of trans. fluid to add a quart of lucas trans conditioner. Does not have a drain plug.
how much trans fluid do i add when changing trans fliud in my 2000 focus
auto trans fluid its crazy i know
The owners manual shows Motorcraft Full Synthetic Manual Transmission Fluid for the 5 speed manual transaxle
ATF, Auto Trans Fluid
If it is the torque shift trans it uses mercron SP fluid be shure of what trans you have
There is no dip stick on a 3 speed "tree" trans. Trans fluid is added by removing the screw on top of trans casing underneath the vehichle.
Mercron / Dextron III
as far as I know you can not add fluid because the trans. is a self enclosed trans.(if you have slippage, its time for repair.
All you can do in your driveway is drop the trans pan, replace the trans filter, replace the trans pan gasket, install pan (no gasket sealer needed or required!) and refill what fluid drained out in the process which is aprox half of the fluid the trans holds. Take it to a trans shop if you want a complete fluid change. They will have the equipment to do a trans flush.
You add fluid at the same place you check it.
type f auto-trans fluid