0
To attach a new strut, first, ensure the vehicle is securely lifted and supported. Remove the old strut by loosening and removing the bolts that connect it to the steering knuckle and top mount. Position the new strut in place, securing it to the steering knuckle and tightening the bolts to the manufacturer's specifications. Finally, reattach any necessary components and lower the vehicle to the ground.
What else can I help you with?
How do you change Porsche boxster rear trunk strut?
To change the rear trunk strut on a Porsche Boxster, start by safely securing the trunk in an open position. Use a flat-head screwdriver to carefully pry off the retaining clips that hold the strut in place. Once the clips are removed, disconnect the old strut by pulling it away from the mounting points. Finally, attach the new strut by pushing it onto the mounting points and securing it with the clips.
Ford freestyle rear door piston change?
To change the rear door piston (hatch strut) on a Ford Freestyle, start by safely supporting the hatch in an open position. Use a socket wrench to remove the bolts securing the old strut to the mounting points on both the hatch and the body. Once removed, attach the new strut by aligning it with the mounting points and tightening the bolts securely. Finally, test the hatch to ensure the new strut operates smoothly.
1985 camaro strut mount bracket doesnt fit new strut mount i cant find a new strut mount bracket at the dealer or NAPA where can i get a new strut mount bracket?
E-Bay?Hemming's Motor?
How do I replace Honda Pilot tailgate struts?
Prop the tailgate all the way open. Use a flat-head screwdriver to pry back the black clip-band at the attachment points; you don't have to pull the clip all the way off, just enough to be able to pull the strut off the ball. The new strut just pushes onto the ball, and clips in place. You do not have to pry the clip to attach the new strut.
Lower control arms?
Also called "A" arms. they are out at each from wheel and attach to the strut by way of the ball joint.
Replace struts on 2003 town and country?
You will need to compress the strut spring with a spring compressor. When the strut spring is compressed remove the strut retaining bolts. There is a strut retaining bolt on the top and the bottom of the strut assembly. Reverse the process to install the new strut.
How to take a strut out of a 1995 cavelier?
Remove wheel attach a spring compressor to strut spring Remove 2 large bolts at back of wheel Remove 3 small bolts at shock tower Strut should drop out Make sure spring compressor in place securely
How To Replace VW Golf Hatch Strut?
Begin by compressing the strut spring with a spring compressor. Be very careful as the strut spring will be under hundreds of pounds of pressure. Remove the strut retaining bolts. Reverse the process to install your new strut.
How do you change struts on a Ford Escort Zx2?
Compress the strut spring with a spring compressor. Remove the retaining bolts from the top and bottom of the strut. Remove the strut assembly. Reverse the process to install the new strut.
How do you change a strut mount on a Mitsubishi montero?
The bottom strut mount is connected to the frame by two retaining bolts. Remove the retaining bolts to remove the strut mount. Reverse the process to install the new strut mount.
What is the difference between top and bottom of front coil spring?
They're usually sightly differently shaped to attach well to the strut and the chassis.
How do you change the front coil springs on a Honda accord?
Use a strut spring compressor to compress the old spring, the remove the strut from the spring. Use the compressor to put the strut into the new spring. Install the strut and spring into the vehicle.
