0
You would bleed a clutch just like you would bleed brakes. Pump the pedal and then open the bleeder valve. Usually the bleeder valve is located on the slave cylinder. I'm not sure if the PT's have a bleeder, in which case you'd need to replace the clutch slave cylinder. They usually come with the reservoir and it's usually filled. They basically aren't serviceable anymore. You just replace them.
ANSWER
IF THERE IS NO LEAKS ON THE SYSTEM,VACUUM BLEEDER IS THE KEY IS TRUE THEY SAY,IF THERE IS NO LEAKS AND ALL INSTALLED,PRESS THE MASTER CYLINDER BYY HAND JUST TO GET FLUID INTO THE SYSTEM ONCE THE MASTER RESERVOIR IS EMPTY REFILL ,THEN REMOVE THE SLAVE CYLINDER AND DISENGAGE FROM THE FORK THAT IT IS FREE THEN VACUUM BLEED FROM THE TOP NOT BOTTOM THE GOOD THING ABOUT IT IS NO PRESSURE INVOLVE LIKE THE OLD SCHOOL STYLE,MAKE SURE WHEN YOU BLEED IT THE VACUUM PUMP RESERVOIR SHOULD BE FULL THAT SHOULD BE GOOD ENOUGH BLEEDING ON THE SYSTEM
What else can I help you with?
How do you bleed a hydraulic clutch system on a gmc sierra?
shhould be da same way u bleed your break system... bleed valve on clutch master cylinder...
How do you get a hydraulic clutch on a 1986 C1500 working?
try to bleed the clutch
Do brakes need to be bled on a pt cruiser after new rotor and pads are installed?
If the hydraulic system was not opened there is no need to bleed system. You could bleed the system to rid it of contaminated (moisture) fluid if you wish.
How do you adjust clutch on escort zx 2?
It is a hydraulic clutch. No adjustment. Can bleed air out of the system to get it working again. If you need info on that I will supply it as soon as you ask again that you want to know how to bleed the clutch on an escort zx2
Could there be anything else wrong if you bleed hydraulic clutch and have pressure but wont go in gear?
If you have bleed the system and If it will not go into gear with the engine running, the clutch pressure plate may have failed.
How do you adjust the clutch on a 1997 Subaru?
It probably has a hydraulic clutch so you will have to bleed the air out of it.
How can you bleed the hydraulic clutch on my 88 bronco 2?
Dumdassesssssssssssss!
How do you adjust a hydraulic clutch for a Chevy Cheyenne?
You can't, It is not ajustable.The clutch slave cylinder may be bad CHECK. could have air in system. BLEED system are the clutch parts are worn out. Replace clutch parts and TURN flywheel.
How can you tell if your hydraulic clutch is goin?
Bleed system and then see if pumping clutch is necessary for proper operation. Keep in mind that there is a master cylinder and slave cylinder.
How do you bleed hydraulic clutch 92 rodeo?
pray like hell
How do you bleed a hydraulic clutch on an Audi 4000?
The rubber gasket failure.
How do you bleed the hydraulic clutch on a 2000 Saturn SL2?
unfortunately Saturn went out on a limb to produce easy swappable parts in their cars. the clutch hydraulic system can not be bleed. it was intended on being replaced as an entire unit, filled with fluid and bleed at the factory. I've made many trips the salvage yards to obtain a entire assembly.
