remove the 2 bolts on the outside of the lense then pull the assembly out.
To change the brake light fuses on a 1995 Geo Prizm, first locate the fuse box, which is typically found under the dashboard on the driver's side. Use a fuse puller or pliers to remove the fuse associated with the brake lights, usually labeled in the fuse diagram. Inspect the fuse for damage; if it's blown, replace it with a new fuse of the same amperage. Finally, reinsert the fuse and test the brake lights to ensure they are functioning correctly.
how much cost to change a clutch for a geo prizm 1995
This might be helpfful. How do you Change a fan belt on 94 prizm?
If it says 'Brake Light Failure' or similar, your brake light is out. change the bulb.
There are three black caps that screw off in the trunk behind the brake light itself unscrew them and the assembly comes out then change bulb
Under your brake master cylinder. Against the firewall.
carefully
Light housing twists from inside of trunk for access of bulbs.Toyo joe
yes
Front or Rear? Both
it indicates that it is time to change the pads for the disc brakes, the light comes on when the sensor is activated
Remove the tail light from the outside. Pulls out. Replace bulb. There is no access from the inside of the trunk.