mine has just gone and i will be changing the whole driveshaft, this is to save time although it is a little more expensive, if the driveshaft goes after just changing the cv joint you will have wasted your money.
best of taking it to a mechanic
Fairly big job but we have the answer on our enthusiasts forum posted by member. www.trailvoy.com
The CV joint in a 2002 Ford Mustang can be replaced by removing the front wheel, and the cotter pin and nuts. Next, the tie-rod end, and the stabilizer bar link, will need to be removed and the CV joint can be removed from the housing when removed from the knuckle.
cv joint damage.repack or change it. repacking may do to solve your problem
A person will need to remove the tire and the lower strut bolt and sway bar of the 2002 Jeep Liberty. Next, the CV axle can be removed, which can be done with a pry bar between the transmission and the CV joint.
The boot on my cv joint is stuck inside of the trans how do u go about getting that out and what else do i need to fix after that comes out
It's part of the driveshaft outer cv joint. Replace the shaft as per 2002 Clio 1.5dci
CV (Constant-Velocity) joint
To remove the CV joints from an Opel Corsa, first, lift the vehicle and secure it on jack stands. Remove the wheel and brake components, then detach the axle nut using a socket wrench. Once the axle is free, use a hammer to gently tap the CV joint out of the transmission housing, being careful not to damage any surrounding parts. Finally, slide the CV joint off the axle shaft, and repeat the process for the other side if necessary.
take it to the shop and fix it
its so easy -- you tube has the basics -- if you can do a turnup you can change the cv- halfshaft