0
You will have to take the transmission out, then pull the torque converter out of the trans. and you will see a shaft sticking out of the front of the trans. and a seal that is in the trans around the shaft. Pop that seal out and put the new seal in it's place.
Then slide the converter back over the shaft and start pushing it back into the trans being sure to turn it clockwise while pushing it back in place you should fill the converter click 3 times, and when it is all the way in you will not be able to slide your fingers between the converter and transmission bell housing around the top are the sides of the converter, If you can then the converter is not in correctly pull it back out and start over until it is all the way in. Just be sure that you are turning the converter while you are pushing it in the transmission. Then put the trans. back in the truck.
What else can I help you with?
How do you change the front transmission seal on a 1991 Chevy Camaro?
You will have to remove the transmission and torque converter from the car to get to the front seal.
How do you change the front transmission seal on a 1978 Ford F150?
By removing the transmission from the truck, then removing the seal.
Where is the front seal located in the turbo 350 transmission?
It is located at the front of the transmission, on the pump. You can see it on the pump were the torq converter goes into the transmission. The trans has to be pulled out of the car to do the repair.
How do you change the front seal on a c-6 transmission?
remove the trans. and get a seal puller
Where is the front seal on a transmission for a 1994 Chevy blazer s10?
The front seal on your automatic transmission would be between the torque converter and the front pump of the transmission. The transmission would have to be removed along with the torque converter to replace the seal.
Where is the front seal in a transmission of a 93 Chevy s10 blazer?
It is between the torque converter and the front pump of the transmission. The transmission or engine has to be removed to gain access to the front transmission seal.
Can you change a turbo seal in a cummins isx turbo?
How to remove turbo on 200 cummins ISX
How do you change the front automatic transmission seal on a 1994 Chevrolet Camaro V6?
you will have to pull the tranny out to change it and then you can pop it out with a screwdriver.
How replaced transmission seal my Tahoe?
Front seal: remove engine or transmission and replace the seal. Rear seal, remove the drive shaft to replace the seal. Unfortunately, you typically only have problems with the front seal.
Is it difficult to change the front bearing in manual transmission in 94 aspire when transmission is out?
The front bearing and seal are the last thing you see when taking the transmission apart! no access from the outside. total dissasemby required.
How to fix leak in front of manual transmission?
Remove transmission and replace front seal.
How do you change front transmission input shaft seal on a 1985 subaru brat?
To change the front transmission input shaft seal on a 1985 Subaru Brat, first, support the vehicle and remove the transmission from the vehicle by disconnecting the necessary components, including the driveshaft and any electrical connections. Once the transmission is out, use a seal puller or a flat tool to carefully remove the old seal from the input shaft. Clean the area thoroughly before installing the new seal, ensuring it's seated evenly. Finally, reassemble the transmission and reinstall it in the vehicle.
