Disconnect the battery, and wires from alt.Remove 2 bolts from front of alt. and 1 on back and lift out.
Remove the alternator belt by loosening the tensioner pulley. Remove the wiring from the alternator. Remove the retaining bolts to the alternator. Reverse the process to install the new alternator.
Remove the wiring harness from your 1990 Subaru alternator. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
just above the alternator wheel. there is a square hole on the top side of the tensioner.
have you tried to change the alternator ? just a suggestion
How do you replace an alternor on a 97 pathfinder
The alternator is bolted to your engine . It is one of the items that is driven by your serpentine belt
In the alternator.
Check the grounds on headlights
To remove the alternator on a Subaru Outback, first disconnect the negative battery cable to prevent electrical shock. Then, remove any components obstructing access to the alternator, such as the serpentine belt and possibly the intake duct. Unbolt the alternator from its mounting bracket and disconnect the electrical connectors. Finally, carefully lift the alternator out of the engine bay.
The oil sending unit on a 2002 wrx subaru is almost under the alternator. I suggest you remove the alternator and it is easier to remove the oil sending unit.
The alternator is overcharging due to the regulator malfunctioning. Replace the alternator.
it has a inbuilt regulator