procedure to RR fuel injector c12 cat
You can remove the injector, on your C 12 Caterpillar diesel engine, by removing the injector rail. Remove the retaining nut and the injector will come out.
what is coolant capacity for cat c12 diesel engine
Check fuel filters for clogging, drain and refill fuel tank with fresh fuel, run fuel system cleaner through the engine, and have the fuel injectors checked for proper operation. If the issue persists, consider having a professional mechanic diagnose the problem to determine if further repairs are needed.
The hole in the bell housing, on a C12 Caterpillar diesel engine, can be found on the bottom of the bell housing. The hole faces straight down.
Any CAT dealer can look it up,I work for a Cat dealer,the torque is 75 ft lbs
A diagram of the cooling system, on a C12 Caterpillar diesel engine, can be found at most Caterpillar heavy equipment dealerships. The diagram can be found at many auto-parts stores.
To drain bad gas from an Arctic Cat, first, locate the fuel line and disconnect it from the carburetor or fuel injector. Use a siphon pump or a fuel transfer pump to remove the contaminated fuel from the tank. Ensure you have a suitable container to catch the old fuel and dispose of it according to local regulations. After draining, refill the tank with fresh fuel and replace any disconnected lines securely.
In order to change the torque you will need to tighten the bolt on the exhaust side of the injector to fifty inch pounds. Tighten the drivers' side bolt to nine foot pounds.
The torque specifications for an injector, on a Caterpillar see nine diesel engine, is seven pounds. Over torque in the injector can ruin it.
fuel filter
Change the fuel filter and have the cat convertor checked out
Hook up a laptop with the appropriate software to read Cat fault codes.