0
What else can I help you with?
Need torque on injector hold down clamps on 3126 cat?
In order to change the torque you will need to tighten the bolt on the exhaust side of the injector to fifty inch pounds. Tighten the drivers' side bolt to nine foot pounds.
How do remove C12 Cat injector?
You can remove the injector, on your C 12 Caterpillar diesel engine, by removing the injector rail. Remove the retaining nut and the injector will come out.
Is it ok to forcefully hold a cat until calm?
No, it definitely is not! Not only will doing this further upset the cat, you could also injure it or it could even hurt itself trying to get away from you. On that note, you could also get hurt if the cat bites or scratches. If your cat is upset, the best thing to do is let it go and leave it alone until it calms down on its own.
Can Falcons kill your cat?
yes because it can fly fast so they can fly down and grab the cat. They only fly down and grab your cat if she/he messes with them or their babies.
What is the torque on rocker arms for a C15 CAT?
The torque specification for rocker arms on a C15 CAT engine is typically in the range of 45-55 ft-lbs. It is important to refer to the manufacturer's specific guidelines for the correct torque value to ensure proper installation and operation.
Need torque on injector hold down clamps on 3126 cat?
In order to change the torque you will need to tighten the bolt on the exhaust side of the injector to fifty inch pounds. Tighten the drivers' side bolt to nine foot pounds.
Need torque specs on early 3126 huei with crab type injector hold down bolt and jumper tubes?
I need a specific year... preferably with engine serial number... in order to answer this. Cat never seemed content with the 3126, and always had to change something on it.
How do you change fuel injector c12 cat?
procedure to RR fuel injector c12 cat
Torque for injector bolts on a 3126B cat engine?
The torque specification for the injector bolts on a Caterpillar 3126B engine typically ranges from 18 to 22 ft-lbs (24 to 30 Nm). It's important to follow the manufacturer's guidelines and use a calibrated torque wrench for accurate results. Always ensure that the bolts are tightened in the correct sequence to prevent any damage to the injector or engine components. Additionally, consult the engine's service manual for specific torque values and procedures.
How do remove C12 Cat injector?
You can remove the injector, on your C 12 Caterpillar diesel engine, by removing the injector rail. Remove the retaining nut and the injector will come out.
Where can you find the torque specs ona cat 3176 engine rocker arms?
i need rocker arm torque for 3176 cat
Where can you find torque specs on a cat C12 engine rocker arms?
Any CAT dealer can look it up,I work for a Cat dealer,the torque is 75 ft lbs
How do you make a cat eat?
hold them down gently, but tightly and slowly place the piece of food in their mouth
What is the torque specs on a caterpillar 3126 flywheel?
Cat 3126 torque 780 ft lbs. that is for all cat 3126 c7 engines reguardless of hp rating
What would you use to found how much a cat would weight?
First, weigh yourself. Then, write that down. Then hold the cat in your hands and weigh yourself again. Subtract the cat and your weight together from your weight.
What do you torque the lug nuts to on a cat backhoe 426c?
The torque for the lug nuts on a cat backhoe 426c depend on what size the lug nuts are; for 1/2 lug nuts the torque should be around 80; for 9/16 lug nuts the torque should be around 140.
Is it okay to hold a cat by the scruff?
It is generally not recommended to hold a cat by the scruff, as it can cause discomfort and potential harm to the cat.
