To change the fork oil on a 2006 Honda CRF150F, first, remove the front wheel and brake caliper for easier access. Next, loosen the top fork clamp and remove the fork tubes from the triple clamp. Drain the old oil by removing the fork caps and compressing the forks to allow the oil to flow out. Finally, refill with the appropriate type and amount of new fork oil, reassemble the forks, and ensure everything is properly tightened before reattaching the wheel and caliper.
you'd have to get into the transmission to change a shift fork
my Honda dealer near me ball parked me 260.00.....yikes
my Honda dealer near me ball parked me 260.00.....yikes
The fork oil capacity for a 2006 Honda VT 600 CD is approximately 480 ml (16.2 ounces) per fork leg. It's important to use the recommended fork oil type and viscosity, typically 10W, to ensure optimal performance. Always refer to the owner's manual for specific maintenance guidelines.
see http://onmyhonor.com/wing/fork.htm
what is the fork level height for a 1995 CR 125 honda
cbr400 nc29, oil change level, 3.2litres, with an oil filter change its 3.4litres.
This bike, which was also known as the Honda Hawk, has front forks that will hold 150 ml of fork oil for each fork.
It takes 5.6 oz of fork oil in each fork.
486ml each fork
4 oz. in each fork.
Rebuliding a Honda CB 450 DX Need to know the ammount of fork oil required in each fork leg.