It is very simple... On the side cover, near the clutch, is a plastic cap. Remove that cap. This is the oil fill cap. You may need a small screwdriver for a lever. Then on the front of the engine is a square headed plug. If I remember correctly a 3/8" open end wrench will fit it. Remove this plug, be sure not to lose it. After the oil is finished draining, reinstall the plug and then fill with oil. Depending on the application it should have anywhere from 14oz to having the oil dribble out of the fill hole.
how to Change oil on a Briggs and Stratton 6.75 HP
No you do not put oil in the gas - 4 hp Briggs & Stratton motors are 4 stroke, not 2 stroke in which you do have to add oil to the gas.
How do I change points to electronic ignition on a 5 hp briggs & stratton small engine?
40 oz
SAE 30
40 oz
There are a couple different oil filters that fit a Briggs and Stratton 24 hp engine. The most common oil filter is a PE 105.
Fix the oil? You don't fix it you just change it every 50 hours.
Briggs & Stratton part # 491056 NAPA filter # 1348
Most Briggs engines that small take 1 pint of oil .
SAE 10w30 full synthetic and change it once a year.
44oz