To change the wiper arm on a Renault Laguna, first, lift the wiper arm away from the windshield. Use a flathead screwdriver to gently pry off the plastic cover at the base of the arm, if applicable. Next, locate the retaining nut and use a socket wrench to remove it. Finally, replace the old wiper arm with the new one, secure it with the nut, and reattach any covers.
check both upper and lower hose of the car
This is a Renault only part. You will have to visit a auto recyclers or order it from Renault.
To remove the front wiper blade arm on a 2003 Renault Clio, first, lift the wiper arm away from the windshield. Locate the small retaining clip or nut at the base of the wiper arm; if it's a nut, use a socket wrench to carefully unscrew it. If there's a clip, gently pry it up to release the arm. Once the fastener is removed, wiggle the wiper arm back and forth while pulling it upwards to detach it from the spindle.
To change the rear window wiper arm on your Nissan X-Trail, first, lift the wiper arm away from the glass. Locate the retaining nut at the base of the wiper arm and use a socket wrench to remove it. Once the nut is removed, gently pull the wiper arm off its spindle, then align the new wiper arm and press it onto the spindle. Finally, secure it with the retaining nut and lower the arm back into its resting position.
Take it to autozone, they change it for free. If not you turn the wiper so its perpendicular to the wiper arm and push down.
it is in front of the driver side under plastic scuttle panel where wiper arm bolted.. lift off cover and remove plastic insert, wiper motor is in front of you now..
To change the wiper blades on a 2001 Lexus LS 430, first lift the wiper arm away from the windshield. Press the tab on the underside of the wiper blade to release it from the arm, then slide it off. Align the new wiper blade with the arm, slide it into place until you hear a click, and then lower the wiper arm back onto the windshield. Repeat the process for the other blade, if necessary.
Under wiper arm flap is a grub nut, Undo nut and use a Wiper arm removal tool (there not expensive approx £10) Remove Arm and Replace with New
get a wiper removal tool and it goes under the arm and you just pry the arm up off the splines to take it off.
This is pretty simple. Just turn on the wipers and stop them while the arm is in the middle of the windshield or there about. Then just change as any other wiper.
buy a small wiper arm puller to pull the arm off the taper once the nut has been rmoved
To change the wiper blades on a 1986 Pontiac Trans Am, start by lifting the wiper arm away from the windshield. Press the tab on the wiper blade's connector to release it from the arm, then slide the old blade off. Align the new wiper blade with the arm and slide it into place until you hear a click, indicating it's secure. Finally, gently lower the wiper arm back onto the windshield.