0
To check the turn signal switch on a 1988 Mighty Max, first ensure the vehicle's ignition is off. Remove the steering column cover to access the switch, then inspect for any visible damage or loose connections. Using a multimeter, test for continuity across the switch terminals while toggling the switch to verify proper function. If the switch is faulty, it may need to be replaced.
What else can I help you with?
What is wrong if you have no turn signals or brake lights on a 1988 Montero everything else works?
check fuses then check all the bulbs, then check the turn signal switch the brake lights work through it
Where is the turn signal flasher located on a 1988 Ford Taurus?
The 1988 Ford Taurus turn signal flasher relay switch is located beneath the drivers side dashboard. The turn signal flasher relay switch will be above the brake pedal.
Where is the turn signal flasher on 1988 Chevrolet 1500?
The turn signal flasher relay switch is located beneath the dashboard, on the drivers side. The relay switch simply plugs in.
Fix turn signals not working 1988 Buick LaSabre?
Bad turn signal flasher? Bad turn signal switch? Blown fuse? Bulbs burnt out?
Where is the multifunction switch in a 1988 Ford Thunderbird?
Inside your steering column , the turn signal lever and hazard flasher button are parts of the multifunction switch that stick out from the steering column
How do you check the Maintenance required light on your 1988 mighty max 2.0 engine?
You don't. Remove the four screws holding the clear gage cover from the dash. On the lower right you'll see a micro switch the manufacturer installed to make you take it in to a dealer. Using a small screwdriver, flip the switch. The light will go out.
How do you fix the horn on a 1988 camaro?
To fix the horn on a 1988 Camaro, check the horn fuse first. Then check the horn relay, wiring, horn, and switch to find the problem.
How do you replace the dimmer switch on a 1988 Chevy Berreta?
You have to pull the steering wheel off to get the whole turn signal stat out and replace the whole thing.
Your 1988 cutlass supreme left blinker doesn't function at all but on the hazards it does what's wrong?
Very likely it's the turn signal switch.
How do you repair the cause for headlights that stay on high beams on a 1988 Suburban even after you click the turn signal lever to low beams?
Hello, It sounds like you may need a new Indicator/turn signal Switch.
Bright lights on a 1988 Chevy pickup don't work. Why?
Check the bulbs first, then the dimmer switch and wiring.
How do you fix the dash lights on a 1988 Chevy S-10 blazer?
Be sure the brightness control switch is not turned off, Check the fuse, Check the bulbs.
