They make tapered plugs (like self tapping screws).
Or drill and tap for the next size.
Or replace the oil pan.
Yes. Repair is usually fine.Can be retapped or welded to repair properly. Or in some cases the tech will advise replacement. Of course there is always someone who will try to repair anything and it sometimes can be done, but usually you have found someone who will spend more hours than what the new part costs with occasional reliability issues. Honda, VW and many other oil pans have had many issues with stripping from just normal wear. Stripped Oil Drain plugs are not necessarily anyones fault, in most cases it is due to wear or a manufacturing defect. Other causes are an overtorque at some point in it's history, could be a few oil changes ago, but once those little threads are stressed they will weaken with each oil change. Don't blame the mechanic who is changing the oil now, instead of causing a fight ask them to find an oversize plug and retap it for a few bucks. Remember you never know when you might really need a mechanic and since there are fewer of them than ever your name might get around!
How do u fix a stripped out oil pan
Over tightening the drain plug.
Ask the garage for a helicoil repair.
You will have to remove the pan completely by undoing all the bolts and then once the oil pan (sump cover) is removed, it is a simple matter to remove the plug, retap/rethread the hole and replace the plug with a new one.
If the threads on the drain plug are stripped and the pan threads are good, you can just replace the drain plug. More often though, the threads in the oil pan that the drain plug screws into are what get stripped. If it's the oil pan, there are still a number of pretty simple options: There are oversized plugs you can buy, rethreading kits with inserts or self-tapping plugs. And there are rubber expanding plugs that are almost foolproof. It is your choice as to how you want to fix it. Go to your local auto parts store and look at your options. Whatever you do, do not use a silicone sealer to fix it.
No, mine's fine, thanks.
Sounds like you need to give it a compression test.
It is always better to restore the stripped drain pan back to its original size with a steel insert.
its either stripped or someone did it.
The plug unscrews by turning it counter-clockwise. Take the stripped plug to a good auto parts store. There are oversized, self-tapping plugs available, but they will need to match yours up to the correct replacement.
Is it just the oil plug that's stripped or is it the oil pan? If it's only the plug, get a new one from the dealer or a local part store (they are quite cheap). If it's your oil pan, then that's a pain. You'll probably have to put in a self tapping oversized plug or replace the oil pan. I would stay away from those cheap rubber oil plug replacement kits that fit in with a plastic screwdriver.
This seems to be a problem with aluminum oil pans. I just did it today and found an answer with an oversized self-tapping oil plug. Found one at my auto parts store for $2.99.