To fix the rear brake drum on a 2002 Honda Foreman 450, start by removing the rear wheel and brake drum cover. Inspect the brake shoes for wear and replace them if necessary. Adjust the brake shoe tension using the adjuster screw, ensuring they make contact with the drum without dragging. Finally, reassemble the components, making sure everything is secure, and test the brakes for proper function.
To remove the rear brake drum from a 2002 Mitsubishi Lancer, start by loosening the lug nuts on the rear wheel and then lift the vehicle and secure it with jack stands. Remove the wheel, then locate the brake drum. If the drum is stuck, tap around the edge with a hammer to loosen it. Finally, pull the drum straight off the hub, ensuring any retaining clips or hardware are removed beforehand.
how to remove rear brake drum on 1994 cavalier
To remove the rear brake drum on a 2002 Pontiac Grand Am, first ensure the vehicle is safely lifted and secured on jack stands. Remove the wheel and tire, then locate the drum's retaining screws, if present, and remove them. Use a brake drum puller if necessary to avoid damaging the drum, then gently pull the drum off the wheel hub. If the drum is stuck, you may need to adjust the brake shoes inward by accessing the adjuster through the inspection hole on the backing plate.
How do you remove rear brake drum from a 1993 Toyota pickup?
Only the rear brakes are drum brakes. The front brakes are disc brakes. To answer your question, twist the end wing nut by your drum brake. It tightens and adjusts how much you have to press on your rear brake lever.
how do you remove rear brake drum on a suzuki 2004 xl7
To replace the rear parking brake shoes on a 2002 Buick Rendezvous, start by lifting the vehicle and removing the rear wheels. Next, remove the brake drum by taking off the retaining screws, if applicable, and sliding the drum off the hub. Disconnect the parking brake cable and remove the old shoes, noting their arrangement. Install the new shoes in the same configuration, reattach the parking brake cable, and reassemble the drum and wheels before lowering the vehicle.
look through the rim. if it's silver and shiny behind it that's a disc brake if it's brown and rusty looking, that's a drum brake
The purpose of a drum brake is to come to a complete stop with any veichle that may have drum brakes in the rear of the car.
Need to know if the vehicle has rear disc brakes or drum brakes and which part of the e-brake system you want to remove, front cable, rear cables, e-brake linings, etc.
the e-brake is actually inside the rear rotor housing. there is an access hole just like on regular drum brakes and you can turn the turnbuckle screw from there
Better hope it is not a drum brake- it was originally equipped with a disc brake caliper.