0
What else can I help you with?
300ZX where do you put in the power steering fluid?
Into the power steering reservoir under the hood.
Changing to headers on 350 small block where does the power steering go?
The power steering stays where it is at. There is only 1 bracket that won't hook up and that is the one that bolts to the factory exhaust manifold. You will have to modify that bracket are make a bracket that will hold the power steering pump and keep it from moving.
What bracket would you use for adding power steering to a d15b7 Honda engine I have heard that these bracket vary by what engine you have Also where would i be able to get one?
Use the Power Steering bracket for a D15b7.. Yes some of the D15b7 civic's came with power steering!! I think all D15 Power steering brackets will work. D15 brackets will not work!!
Where do you put power steering fluid in a 1990 300zx?
The power steering fluid reservoir is up on the passenger side wheel well in the engine bay. Looks like a short fat silver coke can with hoses coming out of it. On a side note, the 300zx twin turbo uses ATF (automatic transmission fluid) not power steering fluid. usually a green casing with black top. the following link is NOT a 300zx, but the reservoir is about the same. http://www.sillbeer.com/images/engine/power-steering-reservoir.jpg
How do you install jeep power steering pump 2000 Jeep Cherokee Laredo?
Remove air filter assembly. Loosen Belt, place pan under steering box, disconnect high pressure and return hoses. Remove bracket to engine bolts, remove pivot bolt, remove bracket and pump as one whole unit. Then reverse the process to install.
What kind of power steering fluid is used for a 1984 300zx turbo?
Automatic Transmission fluid
How do you replace the power steering pump on a 98 Acura CL 3.0?
To replace the power steering pump on a 1998 Acura CL 3.0, first, disconnect the negative battery terminal and remove the serpentine belt. Next, drain the power steering fluid and disconnect the hoses from the pump. Unbolt the power steering pump from its bracket and remove it from the engine bay. Install the new pump by reversing the process: attach it to the bracket, reconnect the hoses, refill the fluid, and reattach the serpentine belt before reconnecting the battery.
Alternator and power steering pump on 97 grand prix mount on same bracket?
On a 97 with the supercharged 3.8L the power steering pump is not mounted on the same bracket as the alternator. The Alternator bracket includes the belt tension arm and has two water lines running through it but the power steering pump is mounted below it on the back of the engine. Why are you pulling the pump?
Where do you add power steering fluid to a 1992 Nissan 300zx?
its on the passenger side silver with a black cap.
Where is the power steering pump on a 1990 300zx?
At the front left side of the engine, if you are looking under the hood.
What do you do when the power steering belt slips off?
Put it back on and tighten the bracket.
How do you remove the power steering bracket on a 1995 Ford Ranger?
fahk jeew
