0
Hi, 1. raise the back end of the car and secure it with jack stands. ( you can do one side at the time as well). 2. take the wheels off. 3. loosen two caliper bolts (they are facing in) and remove, then remove the caliper from around the rotor (use a strong wire to hang the caliper to the spring so that the caliper is not hanging on the brake line) 4. remove two bolts that are holding the rotor in place (also facing in). You will have to use a lot of torque to get these off. 5. remove old rotor. 6. Installation new rotor and put other brake components back on in the reverse ______________________________________________________ The above person is correct. The brake caliper bolts are (14mm) And the Brake bracket that hold the rotor on are (19mm) You may have to used a hammer on the rotors.
What else can I help you with?
Replacing brake tail light bulb in 2007 Nissan maxima?
trying to install bulb in 2007 maxima need info on how to
How do you ajust emergency brake on a 2005 Maxima?
how do I ajust the emergency brake on a 2005 Nissan maxima
What type of brake fluid should I use for 1995 Nissan Maxima?
Brake fluid for 95 maxima
How do you change Rear brake pads on 2004 Nissan Maxima?
change rear brakes on a 2004 Nissan maxima
Change brak disc in Nissan Maxima 96?
how to change rear brake pads to Nissan maxima 96
What would cause a 97 Maxima to vibrate when you apply the brakes?
your brake rotors are warped. You should repalce you brake pads and have the rotors resurfaced if possible, or replaced.
How do you replace rear brake pads on a 1998 Nissan Maxima?
take it to a brake specialist
How do you install front brake pads for 2000 maxima?
How to Install Front Brake Pads Check Related links below.
When you brake your Chevy Trailblazer pulsates why?
The brake rotors are warped are out of round. Need to do a brake job and have the rotors turned are replaced. Be sure to install new pads and shoes.
Where is the brake booster for a Nissan Maxima?
Driver side firewall in the hood where u add the brake fluid
How do you replace brake light switch on 2000 Nissan Maxima?
To replace the brake light switch on a 2000 Nissan Maxima, first, disconnect the negative battery terminal to ensure safety. Locate the brake light switch, which is mounted on the brake pedal assembly. Remove the electrical connector and unscrew the old switch. Install the new switch by screwing it in place and reconnecting the electrical connector before reattaching the battery terminal.
How do you reset the ABS brake light on a 1998 Nissan Maxima?
Go to autozone
